Overview
The G2 Axle and Gear CORE 44 front axle assembly with a 4.88 ratio and ARB Air Locker (part C4TSFS488AC0) is built for the 1997–2006 Jeep Wrangler TJ and LJ and the 1984–2001 Jeep Cherokee XJ. The 4.88 ratio pairs with an ARB Air Locker, and the axle keeps the factory brakes.
The high pinion Dana 44 housing was redesigned to carry loads a stock Dana 30 or Rubicon Dana 44 may struggle with. It is built around stock Dana 44 ring and pinions, axle shafts and aftermarket lockers, so existing internals can be kept.
Key features
- High pinion Dana 44 design in a new G2 housing
- Designed to carry heavy loads.
- Works with stock Dana 44 ring and pinions and axle shafts
- ARB Air Locker
- 30-spline axle spline
- Factory brakes reused
Tire size and gearing
Taller tires and a locker both change how a front axle works, so gear ratio is usually picked with tire size in mind. A 4.88 ratio gives more pulling force at low speed than a higher ratio does, at the cost of higher engine speed on the highway. A locker sends torque to both wheels even when one loses contact, which helps on uneven ground.
Setup matters as much as the parts. A Dana 44 gear set needs correct pinion depth, backlash and bearing preload, and the locker needs proper clearance. Once the new gears are in, plan a gentle break-in before heavy loads. Watch the front pinion seal and axle seals for leaks during the first few outings.
- Note the tire diameter before choosing gears
- Keep gear oil at the correct level
- Recheck the carrier bolts after a few trail trips
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | C4TSFS488AC0 |
| UPC | 631410132946 |
| Position | Front |
| Housing type | 97-06 TJ / 84-01 XJ Dana 44 |
| Gear ratio | 4.88 |
| Traction device | ARB Air Locker |
| Axle spline | 30 splines |
| Wheel bolt pattern | 5 on 4.5 inches |
| Brakes | Reuse factory |
| Fitment | Direct fit |
Vehicle fitment
This axle is for 1997–2006 Jeep Wrangler TJ and LJ models and 1984–2001 Jeep Cherokee XJ models.
Other models need a fit check of their own, so confirm your year and trim before buying.
Installation notes
A 4.88 gear set and a locker both need professional setup and break-in on a Dana 44. Check the 5 on 4.5 inch wheel pattern against your hubs and wheels before fitting the axle.
What’s included
The complete front axle assembly with the 4.88 gear set and ARB Air Locker.

























