Overview
The G2 Axle and Gear JK CORE 44 rear axle with a 5.13 ratio and ARB Air Locker (part C4JSR513AC0) is for 2007 and newer Jeep Wrangler JK models. It pairs a 5.13 ratio with a 30-spline axle and an ARB Air Locker.
The housing is filled with lockers and components of the owner’s choice. It is a direct fit that reuses factory wheel ends and brakes, and the axle is built on the Dana 44 JK 8.8-inch gear design in a new housing.
Key features
- Dana 44 JK 8.8-inch gear design in a new housing
- ARB Air Locker
- 30-spline axle
- Designed for aftermarket components of the owner’s choice
- Reuses factory wheel ends and brakes
Gearing and tire size
A 5.13 ratio is a steep gearing choice that multiplies engine torque at the wheels, which helps on slow climbs and heavy loads. The trade-off is higher engine speed at highway speed, so many owners review their tire diameter and transmission setup before fitting this kind of axle.
Larger tires change the effective gearing, so the combined effect should be worked out before installation. A shop can calculate the change using the tire size in use and the transfer case setting.
An air locker on a 30-spline axle works best when the axle shafts and wheel hubs are checked for fit. Keep tire pressure consistent on both rear wheels, because uneven tires can load the locker unevenly.
- Match tire diameter to the new ratio
- Check tire pressures on both rear wheels
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | C4JSR513AC0 |
| UPC | 631410120615 |
| Position | Rear |
| Housing type | 07-up Jeep JK Dana 44 |
| Gear ratio | 5.13 |
| Traction device | ARB Air Locker |
| Axle spline | 30 splines |
| Wheel ends | Reuse factory |
| Brakes | Reuse factory |
| Fitment | Direct fit |
Vehicle fitment
This rear axle is built for 2007 and newer Jeep Wrangler JK models, within the 2007–2018 range.
Check that your year, model and trim match this axle before buying, particularly for TJ, LJ or JL Wranglers.
Installation notes
A 5.13 gear set with an air locker needs professional setup and break-in on a Dana 44. Confirm the 30-spline shafts match the hubs and wheels you are running before installation.
What’s included
The complete rear axle assembly with the 5.13 gear set and ARB Air Locker.


















