Overview
The G2 98-2033-005 is a front Dana 44 chromoly axle kit for the 1980–1990 Jeep Wagoneer (SJ).
The axles are forged 4340 chrome-nickel alloy, built for the punishment of off-road driving and the higher torque of low-geared, oversized-tire setups. The yoke area around the U-joint cap is thickened to prevent distortion and bearing damage. The shafts have a 30-spline end and use 5-760X joints. No differential is included.
Key features
- Front Dana 44 axle kit
- Forged 4340 chromoly alloy
- Thickened yoke area around the U-joint cap
- 30-spline shafts
- Uses 5-760X joints
Carrier and gearing considerations
A Dana 44 front carrier is the other half of this setup. The shafts must match the carrier’s spline count and the joint style, so a used carrier from a different year or axle family can leave the axles unusable. Look at the axle tag or housing casting before buying, and bring the old shafts along for a visual comparison if you can.
Oversized tires change the load picture. Bigger rubber adds rotating mass and leverage on the front driveline, which can accelerate joint wear. Owners often pair a larger tire with new shafts, a fresh set of hub seals and a check of the front pinion bearing preload while the axle is open.
Think about how the truck is used before choosing parts. A heavier duty use favors periodic inspection, a schedule for greasing the joints, and a quick look at the axle breather after deep water crossings. Daily drivers and dedicated trail trucks wear their driveline at very different rates.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2033-005 |
| UPC | 631410097535 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft position | Front left |
| Spline count | 30 splines |
| Joint | 5-760X |
| Material | 4340 chromoly alloy |
| Differential | Not included |
Vehicle fitment
It fits 1980–1990 Jeep Wagoneer (SJ) models. Check your year, model and trim before ordering.
The 1974–1979 Wagoneer uses the separate 98-2033-004 kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Dana 44 front carrier with 30 splines is required, because no differential is included with the kit.
What’s included
The front Dana 44 chromoly axle kit with 30-spline shafts.
Not included: Differential.








