Overview
The 97-2033-007 is a driver-side inner axle shaft for the Dana 44 front axle, made for the 1968–1978 Ford F-250. It is a replacement chromoly shaft with a 30-spline end that accepts a 5-760X U-joint.
Shafts in this range are forged from high-grade alloy steel and heat treated beyond OEM specifications, with added material to resist the load that wears factory shafts. The shaft is machined for full circle clips and is intended for the front axle of the F-250 applications.
Key features
- Driver-side inner shaft for the Dana 44 front axle
- 30-spline shaft end
- Accepts a 5-760X U-joint
- Machined to accept full circle clips
- Forged, heat-treated high-grade alloy steel
Front inner shaft care
The inner shaft on a Dana 44 front axle transfers power from the front differential to the hub, and it works together with the U-joint and retainer at the inner end. Before installing, check the joint for play, the retainer for wear, and the splines for damage, because a worn joint can cause vibration and a clunk when the drivetrain changes load. Confirm the full circle clip style on the existing axle so the new shaft seats correctly.
Inner shafts wear at the splines and at the U-joint, and the seal area on the axle tube can leak grease when the shaft is worn or the seal is damaged. Replace the axle seal whenever the shaft comes out, and clean the axle tube before fitting the new part. Re-check the retainer and joint after the first few drives, since they can settle as the shaft seats.
- Check the U-joint for play
- Confirm the retainer style before fitting
- Replace the seal during the job
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2033-007 |
| UPC | 631410097184 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft position | Driver side, inner |
| Spline count | 30 splines |
| U-joint | Accepts 5-760X |
| Retainer | Machined for full circle clips |
Vehicle fitment
It is made for 1968–1978 Ford F-250 models. Match your truck’s model year to that range before ordering.
This is the driver-side inner shaft. The passenger-side inner is a different part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shaft is machined for full circle clips and takes a 5-760X U-joint, so confirm the joint and retainer on your existing axle before installing.
What’s included
One driver-side inner axle shaft.






