Select your vehicle
-13%

G2 Dana 44 Replacement Axle Shaft – 95-2033-3-351

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Driver side rear axle shaft for Dana 44, 35 splines
  • Fits 1997–2006 Jeep Wrangler TJ
  • Forged high-grade alloy steel, heat treated
  • Designed for extended service life
  • G2 Axle and Gear part 95-2033-3-351

Description

Overview

This G2 Dana 44 replacement rear axle shaft, part 95-2033-3-351, is the driver side rear shaft with 35 splines. It fits 1997–2006 Jeep Wrangler (TJ) models across the trims covered, including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.

The shaft is forged from high-grade alloy steel and heat treated to exceed OEM specifications. The 35 spline count is one of the larger spline options, which handles higher torsional loads.

Key features

  • Driver side rear shaft
  • 35 splines
  • Forged high-grade alloy steel
  • Heat treated to exceed OEM specifications
  • Designed for extended service life

Driver side spline and carrier check

The driver side rear shaft carries drive torque from the carrier to the left rear wheel, so the spline fit and end type are the first things to verify. Many owners replace the shaft after noticing a clunk on acceleration or a vibration that changes with road speed.

Extended service life depends on how the axle is used. Off road, sudden load changes and tight turns put strain on the shaft and its joints, so inspecting the shaft each season is practical. When a shaft is removed, check the bearing, the seal and the hub for wear. Use clean threads and fresh lubricant where the service instructions for your axle apply.

  • Verify the 35 spline count against your carrier
  • Check the driver side marking before ordering
  • Inspect the seal and bearing during the swap
  • Look for cracks near the spline ends

Specifications

Brand G2 Axle and Gear
Part number 95-2033-3-351
UPC 631410096781
Axle type Dana 44
Axle location Rear
Position Rear
Side Driver side
Spline count 35 splines
Material Forged high-grade alloy steel
Heat treatment Exceeds OEM specifications

Vehicle fitment

It fits 1997–2006 Jeep Wrangler (TJ) models across the trims covered.

Wrangler YJ, LJ and JK models are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the 35 spline count against your rear carrier before ordering, since this shaft has to match the carrier it runs in. The passenger side is a separate part, so confirm the side on your axle before buying.

What’s included

One rear driver side axle shaft.

SKU: G/295-2033-3-351 Categories: ,

Specification

Shipping weight 18.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does it fit a 2005 Wrangler TJ?

Yes. It fits 1997–2006 Jeep Wrangler (TJ) models, which covers 2005. Confirm your year and model, and that your carrier takes 35 spline shafts, before ordering.

Is it the driver or passenger side?

Driver side rear. The passenger side version is part 95-2033-3-352, which is a separate shaft, so confirm the side on your axle before ordering.

Does it have 35 splines?

Yes, it has 35 splines. Check the spline count on your rear axle before buying, since the shaft must match the carrier.

How do I know the shaft is worn and not the U-joint?

A worn shaft often shows as splines that look polished or chipped, and the vibration may change with throttle. A worn U-joint usually makes a clicking sound on turns. Inspect both before ordering replacement parts.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon