Select your vehicle

G2 Dana 44 IH Scout Front Chromoly Axle Kit – 98-2033-003

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front Dana 44 chromoly axle kit for the International Scout, part number 98-2033-003
  • 30 splines, uses 5-760X U-joints
  • Fits 1971–1980 International Scout II
  • Differential not included

Description

Overview

The G2 98-2033-003 is a front Dana 44 chromoly axle kit for the International Scout. It fits 1971–1980 Scout II models, including the 73–80 Scout range.

G2 describes its axles as forged from 4340 chrome-nickel (chromoly) alloy with extra material added at the yoke area around the U-joint cap, which G2 says prevents distortion that can damage bearings. The kit has a 30-spline end and uses 5-760X joints. The differential is not included, so the kit needs a compatible carrier.

Key features

  • Front Dana 44 axle kit
  • Forged 4340 chromoly alloy.
  • Extra material at the U-joint cap yoke area
  • 30-spline shafts
  • Uses 5-760X joints

Matching the carrier and joints

A front axle shaft only works when it matches the carrier it bolts into. On a Dana 44, the spline count on the shaft, the differential side gear and the hub all need to agree. Before ordering, pull the existing carrier or check its markings, then compare the spline count and the joint style at each end. Mismatched splines are a common reason a new shaft fails to slide in or wears out quickly.

Chromoly shafts take more load than stock steel, but they only protect the drivetrain when the rest of the front end is in good shape. Inspect the wheel bearings, hub seals and U-joint caps when the axles are out. Worn joints cause vibration at speed and can damage a new shaft if they are left in place. Replacing joints at the same time as the shafts is a practical habit, since the joint is the part most likely to fail next.

Gear ratio and tire size also affect how hard the shafts work. Larger tires and low-range driving put more torque through the axles, which is why many owners upgrade the shafts alongside a regear or a locker. Keep a supply of grease and a torque wrench for the hub and pinion fasteners.

Specifications

Brand G2 Axle and Gear
Part number 98-2033-003
UPC 631410097511
Axle type Dana 44
Axle location Front
Shaft position Front left
Spline count 30 splines
Joint 5-760X
Material 4340 chromoly alloy
Differential Not included

Vehicle fitment

It fits 1971–1980 International Scout II models, covering the 73–80 Scout.

The Jeep Wagoneer front kits are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit does not include a differential, so confirm that your front carrier is a Dana 44 with 30 splines before fitting the axles.

What’s included

The front Dana 44 chromoly axle kit with 30-spline shafts.

Not included: Differential.

SKU: G/298-2033-003 Category:

Specification

Shipping weight 27.20 lbs
Package dimensions 49.00 × 8.50 × 8.30 in
brands

Fitment

VehicleYearsTrims
International Scout II1971–1980Base, SS2, Terra, Traveler, XLC

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the G2 98-2033-003 fit a 1976 Scout?

Yes. It fits the 1971–1980 Scout II, and 1976 falls inside that range. The 73–80 Scout years match this front axle kit.

Does this kit include a differential?

No. The differential is not included, so you need a Dana 44 front carrier with 30 splines to use this kit.

What joint does this axle kit use?

It uses 5-760X joints with a 30-spline end, and the axles are forged 4340 chromoly alloy. Confirm the carrier's spline count before fitting the axles to your Scout.

Is this kit for the left or right front?

It is a front left kit. Confirm the side and carrier for your Scout before ordering. The 73–80 Scout years apply to this front axle kit.

How often should Dana 44 axle shafts be inspected?

Inspect them whenever the wheels come off for a brake or bearing job. Look for torn boots, grease leaks, play in the joints and bent or cracked shafts. Replace any joint that binds or clicks under load.

What wears first on a front axle kit?

Joints and seals usually wear first. Clicking on tight turns, grease on the inside of the wheel, or vibration under power point to a worn joint. Address those signs before the shaft fails on the trail.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon