Overview
The G2 Dana 44 GM Front Chromoly Axle Kit, part 98-2033-006, is a front axle kit with a Dana 44 front axle. It is built for 1973 to 1978 half-ton GM applications.
G2 forges these axles from high tensile 4340 chrome/nickel alloy for off-road use, larger tires and the high torque of low-geared vehicles. Extra material around the U-joint cap is meant to stop the yoke distorting and damaging bearings.
Key features
- Forged 4340 chromoly alloy
- Extra material in the yoke area around the U-joint cap
- 30 spline
- Uses the 5-760X U-joint
Front axle upkeep
Front axles take steering loads, drive torque and shock from uneven ground, so the joint and yoke areas see wear that rear axles often avoid. A forged shaft and extra yoke material help resist distortion, but the U-joint, pinion seal and wheel bearings still need regular checks. Look for play in the joints, grease leaks around the cap and any clicking when turning.
Pairing a new axle with fresh joints and seals is a common approach when the old parts are worn. Tie rod ends and ball joints also see more load after an axle swap, so inspect them while the front end is apart. Check the hub and bearing preload after the first few drives, and retorque the axle fasteners as the installation work settles.
Gear oil and grease should be checked after the first trail trips, and a fresh fill helps protect the gears and bearings from heat and water. Keep the differential breather clear to avoid pressure leaks.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2033-006 |
| UPC | 631410097542 |
| Axle | Dana 44 front |
| Spline count | 30 |
| U-joint | 5-760X |
| Material | 4340 chromoly steel |
Vehicle fitment
This kit is for 1973 to 1978 half-ton GM trucks. Confirm the application for your specific model, year and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 30 spline end and the 5-760X U-joint suit your differential and joints before fitting.
What’s included
The Dana 44 front axle kit. Check the package contents against your installation before starting.





