Overview
The 97-2033-008 is a passenger-side inner axle shaft for the Dana 44 front axle, made for the 1968–1978 Ford F-250. It is a chromoly replacement shaft with an 18.625-inch overall length and a 30-spline end.
G2 describes its inner shafts as forged from high-grade alloy steel and heat treated beyond OEM specifications for extended service. The shaft accepts a 5-760X U-joint and is machined for full circle clips. Pair it with the driver-side inner from the same G2 line when both sides need replacing.
Key features
- Passenger-side inner shaft for the Dana 44 front axle
- 18.625-inch overall length
- 30-spline shaft end
- Accepts a 5-760X U-joint
- Machined for full circle clips
Measuring before you order
Overall length is the number that decides whether an inner shaft will fit the axle you have. Measure the existing shaft from the end that seats in the differential to the outer end before ordering, then compare it with the stated length. Count the splines at the same time, and check the U-joint end so the joint and retainer match the new part.
Both inner shafts often wear at similar rates, so inspect the opposite side when one needs replacing. Replacing only one worn shaft with a new one while keeping the other can leave uneven wear and a mismatched feel on the trail. Keep the old parts until the new shaft has been checked for fit, and check the seal and grease at the same time.
- Measure overall length before ordering
- Count splines and check the U-joint end
- Inspect the opposite side at the same time
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2033-008 |
| UPC | 631410097191 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft position | Passenger side, inner |
| Overall length | 18.625 in |
| Spline count | 30 splines |
| U-joint | Accepts 5-760X |
| Retainer | Machined for full circle clips |
Vehicle fitment
It fits 1968–1978 Ford F-250 models on the Dana 44 front axle. Confirm the year and model of your truck before ordering.
This is the passenger-side inner shaft; the driver side is 97-2033-007. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 18.625-inch length is the overall length of this shaft, so measure the existing shaft before ordering to confirm it matches your setup. Check the U-joint and retainer as well.
What’s included
One passenger-side inner axle shaft.







