Overview
The G2 Axle and Gear 97-2033-012 is a passenger-side inner axle shaft for the Dana 44 front axle, made for 1980–1990 Jeep Wagoneer (SJ) models. Its overall length is 32.120 inches, and it has a 30-spline end that accepts a 5-760X U-joint.
The shaft is forged from chromoly alloy steel and heat treated to exceed OEM specifications. It is machined to accept full circle clips.
Key features
- Passenger-side inner shaft for the Dana 44 front axle
- 32.120-inch overall length
- 30-spline shaft end
- Accepts a 5-760X U-joint
- Machined to accept full circle clips
Choosing the right setup
The passenger-side inner shaft transfers torque from the differential to the front hub on its side, so its overall length has to suit the axle’s geometry. Measuring the old shaft from end to end is the most reliable way to confirm the match before buying, and it helps catch a shaft that is worn or bent. A length mismatch can pull on the joint and cause early wear.
Many owners replace the joint, retainer and axle seals together with the shaft, since the hub has to come off either way. Keep both sides in mind when deciding, because a new passenger shaft paired with an old driver shaft can leave the two sides wearing at different rates.
- Measure the old shaft end to end
- Replace the U-joint with the shaft
- Check the retainer clip groove
- Replace seals while the axle is apart
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2033-012 |
| UPC | 631410097238 |
| Axle type | Dana 44 |
| Axle location | Front |
| Shaft position | Passenger side, inner |
| Overall length | 32.120 in |
| Spline count | 30 splines |
| U-joint | Accepts 5-760X |
| Retainer | Machined for full circle clips |
Vehicle fitment
It is a fitment match for 1980–1990 Jeep Wagoneer (SJ) models on the Dana 44 front axle. Confirm fit for your vehicle’s year, model and trim before ordering.
This is the passenger-side inner; the driver side is 97-2033-011. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your existing inner shaft and compare it with the 32.120-inch overall length before ordering, since length is the key dimension for this shaft. Check the joint and retainer as well, because the shaft takes a 5-760X U-joint.
What’s included
One passenger-side inner axle shaft.






