Control arms explained: fixed, adjustable or long arm, pinion angle and caster, flex joints, upper arms for IFS, greasing, and which arm suits your…
Control Arms
Showing 25–36 of 264 resultsSorted by popularity
-
Control Arms
Rubicon Express Super-Flex Rear Upper Adjustable Control Arms – RE3726
- Rubicon Express R/ERE3726 rear upper adjustable control arm with Super-Flex joint
- Thick wall DOM tubing and powder coat finish
- Adjustable for pinion, caster and wheelbase
- Fits the 2020 to 2026 Jeep Gladiator JT
SKU: R/ERE3726 -
Control Arms
Rubicon Express Super-Flex Rear Lower Adjustable Control Arms – RE3727
- Rubicon Express R/ERE3727 rear lower adjustable control arm with Super-Flex joint
- Thick wall DOM tubing with corrosion resistant powder coat
- Adjustable for pinion, caster and wheelbase
- Fits the 2020 to 2026 Jeep Gladiator JT
SKU: R/ERE3727 -
Control Arms
Rubicon Express Super-Flex Rear Lower Adjustable Control Arms – RE3724
- Rubicon Express R/ERE3724 rear lower adjustable control arm with Super-Flex joint
- Thick wall DOM tubing, powder coated for corrosion resistance
- Adjustable for pinion, caster and wheelbase setup
- Fits the 2018 to 2026 Jeep Wrangler JL
SKU: R/ERE3724 -
Control Arms
Rubicon Express Super-Flex Front Upper Adjustable Control Arms – RE3723
- Front upper adjustable control arm with Super-Flex joint
- Adjusts pinion, caster and wheelbase for a short arm setup
- Thick wall DOM tubing, powder coated for corrosion resistance
- Fits the 2018–2026 Jeep Wrangler JL and 2020 Gladiator JT
- Part RE3723
SKU: R/ERE3723 -
Control Arms
Rubicon Express Super-Flex Front Lower Adjustable Control Arms – RE3722
- Front lower adjustable control arms with Rubicon Super-Flex joints
- Adjustment range for pinion, caster and wheelbase setup
- Thick-wall DOM tubing, powder coated
- Fits the 2020 Jeep Gladiator JT and 2018–2026 Jeep Wrangler JL
- Part number RE3722
SKU: R/ERE3722 -
Control Arms
Rubicon Express Super-Flex Adjustable Rear Upper Control Arm Set – RE3725
- Adjustable rear upper control arm set with Rubicon Super-Flex joints
- Fits the 2018–2026 Jeep Wrangler JL, two-door and four-door
- Adjusts pinion, caster and wheelbase, or replaces damaged factory arms
- Thick wall DOM tubing, powder coated; part number RE3725
SKU: R/ERE3725 -
Control Arms
Rough Country Upper Control Arms (3.5″ Lift) – 76700
- Tubular geometry correction upper control arm, Rough Country 76700
- Designed for a 3.5 inch lift
- Ball joint kept at optimum angles after lifting
- Clevite rubber bushings for enhanced durability
- Fits the 2007–2021 Toyota Tundra
SKU: R/C76700 -
Control Arms
Rough Country Upper Control Arms (3″ Lift) – 31201
- Front upper geometry correction control arm, Rough Country 31201
- Designed for a 3 inch lift
- Ball joint kept at optimum angles after lifting
- Clevite rubber bushings for enhanced durability
- Fits the 2012–2018 Ram 1500 and 2019–2024 Ram 1500 Classic
SKU: R/C31201 -
Control Arms
Rough Country Upper Control Arms – 50008
- Tubular front upper control arm, Rough Country 50008
- Designed to make alignment adjustments easier
- Keeps the ball joint at factory-like angles after lifting
- Clevite rubber bushings for enhanced durability
- Fits the 2019–2023 Ford Ranger
SKU: R/C50008 -
Control Arms
Rough Country Toyota Fabricated Upper Control Arms – 74201
- Front upper fabricated control arm, Rough Country 74201
- One-piece fabricated steel body with no welded weak spots
- POM ball joints, fully greaseable, for more wheel articulation
- Clevite OE style rubber bushings
- Fits the 2005–2020 Toyota Tacoma
SKU: R/C74201 -
Control Arms
Rough Country Rear Upper Adjustable Control Arms – 11380
- Rear upper adjustable control arm, Rough Country R/C11380
- X-Flex ball-in joints with a 2.5 inch diameter body and 1.25 inch threads
- Upper arm joints pivot up to twenty degrees
- Lower arm joints capable of thirty-five degrees of pivot
- Fits the 2007–2018 Jeep Wrangler (JK), 2-door and Unlimited 4-door
SKU: R/C11380 -
Control Arms
Rough Country Jeep Adjustable Control Arms – 11900
- Adjustable front lower control arm, Rough Country 11900
- X-Flex ball-in joints with 2.5 inch diameter body
- Recommended for 0 to 6.5 inch suspension lift kits
- Lower arm joints pivot up to thirty-five degrees
- Fits Jeep XJ, Comanche, ZJ, LJ and TJ
SKU: R/C11900
Why control arms matter on a lifted vehicle
When a vehicle is lifted, factory control arms often cannot return the axle or wheel to the correct position. That can cause poor alignment, wandering, vibration or running out of travel at the joints. Aftermarket arms restore alignment range and sometimes improve articulation. Short arms and drop brackets are common on mild lifts, while long arms are designed for taller lifts and offroad use.
How to choose
Start with the position you need: front or rear, upper or lower. Each is specific to the suspension layout, so an arm for a coil-spring solid axle Jeep is nothing like an upper arm for an independent front suspension truck. Then match the arm to your lift height range, shown in the listing, because the arm length and geometry are built for that window.
- Adjustable arms: Let you set caster or pinion angle, which is important after a lift.
- Fixed-length arms: Simple and strong, but they only fit the range they were designed for.
- Replacement arm with bushings: A good choice when factory bushings are worn out.
Specs to compare
Look at the joint design. Rubber or polyurethane bushings are quiet and forgiving, while heim or spherical joints give more articulation and need more maintenance and tolerate more noise. Ball joint designs on upper arms for independent front suspension trucks, including billet and tubular styles, are tied to the vehicle's steering geometry. Also check material, whether the kit includes bushings or hardware, and the stated lift range. Replacement joint kits are sold separately for rebuilding worn arms.
Installation notes and alignment
Control arms are a suspension and steering safety item. Torque bolts to the manufacturer's specifications with the vehicle at ride height, since tightening bushing bolts with the suspension hanging can bind the rubber and shorten its life. Install pairs rather than single arms, and have a professional alignment done after any arm change.
Check that the track bar, brake lines, sway bar links and driveline angles still work with your lift. Confirm fitment for your exact year, make, model, drivetrain and lift height, and follow the manufacturer's specifications for any additional parts required. Inspect joints and bolts regularly if the vehicle sees trail use.
Matching parts and common mistakes
Control arms rarely work alone. A lift that needs new arms often also needs a track bar, longer brake lines, sway bar disconnects or extended links, and shocks sized for the new travel. Plan the full list before starting so the vehicle is not left half finished. A set that includes the correct bushing sleeves and hardware saves a trip to find missing parts.
A common error is tightening arm bolts with the suspension at full droop, which preloads the bushings and can tear them within a short time. Another is mixing arms of different lengths side to side, which shifts the axle off center. Do not reuse stretched or damaged hardware, and use the grade of bolt the manufacturer requires.
For upkeep, inspect arms for bends, cracks near the welds and play in the joints. Grease any joints with fittings on the schedule listed. Listen for clunks over bumps, which often signal a loose bolt or a worn bushing. Recheck torque after the first few hundred miles, since bushings settle.
Related guides
- Control Arms Explained: Fixed, Adjustable or Long Arm
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Popular Control Arms brands
- Rubicon Express (46)
- TeraFlex (30)
- Pro Comp Suspension (23)
- Fabtech (20)
- Crown Automotive (19)
- ICON Vehicle Dynamics (19)
- Icon Suspension (19)
- Rock Krawler (17)
- Omix-Ada (9)
- Rough Country (9)
- Skyjacker (9)
- Tuff Country (8)
Control Arms FAQ
Do I need adjustable control arms for a lift?
Not for every lift. Mild lifts may work with factory or fixed-length arms. Taller lifts often need adjustable or longer arms to restore caster and pinion angle. Check the lift height range stated in the listing.
What is the difference between bushings and heim joints?
Bushings use rubber or polyurethane and are quiet and low maintenance. Heim or spherical joints allow more articulation but can be louder and need more upkeep. The right choice depends on how the vehicle is used.
Do I need an alignment after installing control arms?
Yes, plan on one. Changing arms alters wheel position and angles. A professional alignment sets caster, camber and toe so the vehicle tracks properly and tires wear evenly.
Can I replace only the worn joints instead of the whole arm?
Sometimes. Joint rebuild kits exist for certain arms, but they require pressing or the right tools. If the arm is bent or the bushing sleeve is damaged, replacement arms are the safer route.









