Overview
The Rancho RS66162B is a rear upper adjustable control arm for 1997–2006 Jeep Wrangler TJ models. Rancho designed it to work anywhere from stock height up to a 4-inch lift, and it allows caster and pinion angle adjustments so the rear axle can be set to match the new ride height.
The arm is made from heavy-duty DOM tubing for strength against off-road impacts. Its forged ends use Rancho’s D2 synthetic, high-articulation bushings, which self-center and need no grease. Rancho sells a rebuild kit for the arm, but it is not included.
Key features
- Adjustable caster and pinion angle
- Covers stock height through a 4-inch lift
- Heavy-duty DOM tubing
- Forged ends with grease-free D2 bushings
- Rear upper position
Setting the rear axle geometry
A rear upper control arm locates the axle so it does not twist under acceleration and braking. When the suspension is raised, the upper arm angle changes, which is why adjustable arms exist. Adjusting caster and pinion angle lets the axle be set back to a stable position after the ride height changes. Shops usually perform this work on an alignment rack, since small changes in angle affect driveline vibration and tire wear.
Worn bushings are a common reason the arm needs attention. Look for play at the ends, cracking around the bushing, or uneven wear on the rear tires. Check the arm for bent tubing after any hard impact. When bushings are replaced, the arm should be realigned because bushing movement changes the set angles. Inspecting the lower arms and track bar during the same job is a practical step on a lifted TJ.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS66162B |
| Position | Rear upper |
| Lift range | Stock to 4 inches |
| Construction | DOM tubing, forged ends |
| Bushings | D2 synthetic, grease free |
| Rebuild kit | Sold separately |
| Fitment type | Direct fit |
Vehicle fitment
The RS66162B fits 1997–2006 Jeep Wrangler (TJ) models, including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wrangler JK, JL and LJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set caster and pinion angle after installing the arm, since both are adjustable on this part.









