Overview
The Pro Comp Pro Series front upper control arm, part number 57023B, is a tube style arm with a high angle ball joint for the 2022 Toyota Tundra. It mounts in the front upper position.
The Pro Series arms combine the strength of a race-style uni-ball arm with the ride of factory parts. The high angle ball joint, PTMEG bushings and helix grooved pivot points add travel and aim for a quieter ride than traditional uni-ball arms.
The arms are designed to correct geometry and alignment after a lift, so plan an alignment after installation.
Key features
- Tube style arm with high angle ball joint
- PTMEG bushings for low maintenance
- Helix grooved pivot points paired with a sealed dust cap
- Geometry corrected for use after a lift
Alignment after arm replacement
Replacing an upper control arm changes the front geometry, so the alignment is part of the job rather than an extra step. Camber and caster set how the tire meets the road, and a shift of either can show up as uneven wear on the inside or outside edge of the tread. Scheduling the alignment right after the install protects the new tires and the steering feel.
On a Tundra, the upper arm works alongside the lower arm, ball joints and steering linkage. Inspecting those parts while the wheel is off helps catch wear before it affects the new arm. Keep the dust cap clean and avoid pressure-washing the pivot, since that can push grit past the seal.
If the truck is used for towing or trail driving, check the arm more often and after hard impacts.
- Schedule an alignment right after install
- Inspect the lower arm and ball joints
- Check the dust cap during tire rotations
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57023B |
| Position | Front upper |
| Arm type | Tube |
| Joint design | High angle ball joint |
| Bushings | PTMEG |
| Listed vehicle | 2022 Toyota Tundra |
Vehicle fitment
It fits the 2022 Toyota Tundra. Confirm your vehicle’s year, model and trim before ordering, since other Tundra years and Toyota trucks and SUVs fall outside the 2022 model year.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the arms are designed to correct geometry after a lift, a full alignment is needed once the new upper control arms are installed.
What’s included
The front upper control arm, tube style with a ball joint, sold as part number 57023B.
Not included: Check the package contents against your installation before starting, including any other suspension components you plan to replace.












