Overview
The Pro Comp Pro Series front upper control arm, part EXP56122B, is a tube arm with a High Angle Ball Joint for the 2019–2021 Ram 1500 and 2019–2021 Ram 1500 Classic. It replaces the factory upper arm on the front suspension.
The arm combines the strength of a race-style uni-ball arm with the ride quality of factory parts. The new ball joint design adds strength and travel, and the geometry is built to stay correct after a lift. It uses low maintenance PTMEG bushings, helix grooved pivot points and a sealed dust cap, which help keep it quiet over years of service.
Key features
- Tube arm with a newly designed High Angle Ball Joint
- Increased strength and travel
- Geometry corrected for a lifted truck
- Low maintenance PTMEG bushings
- Helix grooved pivot points with a sealed dust cap
Geometry and tire wear
The upper arm sets the top of the wheel’s angle, so its condition has a direct effect on tire wear. When the joint loosens, the wheel can lean or toe out under load, and the tread on the inside or outside edge wears faster than the rest. Watching tire wear patterns is one of the easiest ways to spot a suspension problem early.
On a Ram 1500 the front suspension sees a mix of highway loads and rough roads. A new arm restores the intended geometry only if the rest of the front end is in good shape, so check ball joints, tie rod ends and bushings together.
After installing an arm, have the front alignment checked and recheck the fasteners after the first few drives.
- Watch for uneven tire wear
- Check tie rod ends with the arm
- Recheck fasteners after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP56122B |
| Position | Front upper |
| Arm type | Tube |
| Joint design | High Angle Ball Joint |
| Bushings | PTMEG |
| Fit type | Direct fit for the 2019–2021 Ram 1500 and Ram 1500 Classic |
Vehicle fitment
It fits the 2019–2021 Ram 1500 and the 2019–2021 Ram 1500 Classic, across the trims in that range. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on a front alignment after installing these arms. Pro Comp designed them to correct geometry after the truck is lifted, and the alignment is what sets that geometry on the road.
What’s included
One front upper control arm, part EXP56122B.














