Overview
The Rancho RS66163B is a rear lower adjustable control arm that fits 1997–2006 Jeep Wrangler TJ models. It works from stock height up to a 4-inch lift and allows caster and pinion angle adjustments. Rancho adjustable upper and lower arms are made for the front and rear, and this part is the rear lower.
The arm is made from heavy-duty DOM tubing for strength on off-road obstacles. The lower arm is bent like the factory design, which Rancho says allows larger wheels and tires. The forged ends carry Rancho’s D2 synthetic, high-articulation bushings, which self-center and are grease free. A rebuild kit is available but sold separately.
Key features
- Adjustable caster and pinion angle
- Works from stock height to a 4-inch lift
- Heavy-duty DOM tubing
- Lower arm bent like the factory design for larger tires
- Forged ends with grease-free D2 bushings
Before you buy
Rear lower control arms locate the axle and carry braking and drive loads, so their angles shape how a lifted TJ tracks and how the pinion sits under acceleration. When a lift moves the axle, the caster and pinion angles change with it. Adjustable arms let you bring those angles back into a usable range instead of accepting whatever the stock brackets leave behind.
Before ordering, review the rest of the rear suspension. Upper arms, the track bar and shock length often need matching changes at the same lift height. Inspect the bushings and frame mounts on the old arm for cracks or play, and replace worn hardware while the axle is down. Recheck driveline angles and brake hose slack once the new arms are installed.
- Measure pinion angle before and after the change
- Replace worn frame bracket bolts at the same time
- Check brake hose length after the axle moves
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS66163B |
| Position | Rear lower |
| Lift range | Stock to 4 inches |
| Construction | DOM tubing, forged ends |
| Bushings | D2 synthetic, grease free |
| Rebuild kit | Sold separately |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wrangler JK, JL and LJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set caster and pinion angle after installation, since the arm is adjustable for both.









