Select your vehicle
-13%

Pro Comp Pro Series Front Upper Control Arms – 52006B

Pro Comp Suspension

Shop Ford Ranger Control Arms on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp Pro Series front upper control arm, part number EXP52006B
  • Fits the 2019–2021 Ford Ranger
  • High-angle ball joint with PTMEG bushings
  • Corrected geometry and alignment after the vehicle is lifted
  • Designed for on-road ride quality without traditional uni-ball noise

Description

Overview

The Pro Comp Pro Series front upper control arm, part number EXP52006B, is a tube-style upper arm for the 2019–2021 Ford Ranger. It uses a newly designed high-angle ball joint to combine the strength of a race-style uni-ball arm with ride quality close to factory parts.

The arm gives increased strength and travel for the suspension, with corrected geometry and alignment after the vehicle is lifted. The design aims for on-road ride quality without the noise that traditional uni-ball arms are known for.

Low-maintenance PTMEG bushings and helix grooved pivot points are used, with a sealed dust cap, which Pro Comp says provides years of quiet performance.

Key features

  • Newly designed high-angle ball joint
  • Increased strength and travel for the suspension
  • Corrected geometry and alignment after the vehicle is lifted
  • Low-maintenance PTMEG bushings
  • Helix grooved pivot points with a sealed dust cap

Front upper arm care

A front upper arm controls the top of the wheel’s travel and holds the camber setting under load. On a daily driver the arm sees steady loads from braking and cornering, and on trails it takes impacts that can stress the pivot and bushing. Regular inspection helps catch play before it affects tire wear.

Look at the arm’s pivot and joint during each service. A worn joint may feel loose, make noise over bumps or pull the steering slightly. Keeping the dust cap intact and the grease path clean helps the bushing last. When replacing an arm, confirm the mounts and torque the fasteners as specified.

After any arm change, have the front end aligned so the new part and the rest of the suspension are set correctly.

  • Inspect the pivot for play
  • Check the dust cap for damage
  • Align the front end after changes

Specifications

Brand Pro Comp Suspension
Part number EXP52006B
Position Front upper
Arm type Tube
Joint design High-angle ball joint
Bushings PTMEG
Fitment type Direct fit

Vehicle fitment

It fits the 2019–2021 Ford Ranger in the XL, XLT and Lariat versions.

The list covers only the 2019–2021 Ranger, so other Ranger years are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The arm is designed to restore corrected geometry on a lifted vehicle, so plan an alignment of the front end after installation.

What’s included

One front upper control arm. Check the package contents against your installation before starting, including mounting hardware.

Fitment

VehicleYearsTrims
Ford Ranger2019–2021Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this upper control arm fit a 2019 Ford Ranger?

Yes. It fits the 2019–2021 Ford Ranger, so the 2019 model year is covered. Other Ranger years fall outside that range, so confirm your year before installing.

Is this arm for the front or the rear?

Front. It is a front upper control arm with a tube design and a high-angle ball joint, part number EXP52006B, and it is a direct fit.

What is special about the joint?

It has a newly designed high-angle ball joint, which combines the strength of a race-style uni-ball arm with ride quality close to factory parts. It runs with less road noise than traditional uni-ball arms.

Should the other front upper arm be replaced at the same time?

Often yes, since both sides wear at similar rates and mismatched arms can pull the vehicle or change the ride. Replacing arms in pairs keeps the front end balanced, and an alignment should follow any arm change.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford Ranger Control Arms on Amazon