Overview
The Rock Krawler RKSRK06060 is an Adventure Series lower control arm for the 2007–2018 Jeep Wrangler (JK). It is made of 1.625 inch solid steel and bent for better ground clearance off-road.
Rock Krawler fits Pro-Flex joints at each end to isolate vibration, which it describes as a balance of off-road ability and on-road ride. The joints are greasable and rebuildable, so the arm can be serviced rather than replaced when worn.
Key features
- 1.625 inch solid steel tubing
- Bent for improved ground clearance
- Pro-Flex joints at both ends
- Greasable and rebuildable joints
- Vibration isolation for a quieter ride
Care and maintenance
Control arms work through their joints and bushings, so routine care mostly focuses on the joints. Greasable joints should be lubricated on a regular schedule, and more often after water crossings or long runs in mud. Check the joint boots and seals for tears, since dirt and moisture get into the joint and speed up wear.
A solid steel arm rarely needs more than inspection, but the tube should be checked after any impact on rocks or logs. Look for dents, cracks near the welds and bends that change the arm’s position. A bent arm that has been straightened can crack later, so replace an arm that has taken a serious hit instead.
- Inspect the joints after each trail outing
- Check the frame-side mounts for looseness
- Recheck alignment after replacing an arm
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK06060 |
| Series | Adventure Series |
| Material | Solid steel, 1.625 inch |
| Joints | Pro-Flex at each end, greasable and rebuildable |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 2-door and Unlimited 4-door bodies, across the Sport, Sahara, Rubicon and X models and the anniversary editions.
Vehicles outside this fit include the Wrangler JL, Gladiator, and earlier TJ and LJ. Check your year, model and trim before you buy.
Installation notes
Control arms affect axle location, so check the front or rear alignment and driveline angles after the arm is installed.
What’s included
One lower control arm with Pro-Flex joints at each end.









