Control arms explained: fixed, adjustable or long arm, pinion angle and caster, flex joints, upper arms for IFS, greasing, and which arm suits your…
Control Arms
Showing 49–60 of 264 resultsSorted by popularity
-
-
-
Control Arms
Rock Krawler High Clearance Lower Control Arms – RK02015
- High clearance front lower control arms sold as a pair
- Fits the 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- Bent for improved ground clearance and crossover angles
- Adjustable pinion angle
- Solid alloy steel with Rock Krawler Abuse Proof Lifetime Warranty
SKU: RKSRK02015 -
Control Arms
Rock Krawler Adventure Series Rear Lower Control Arms – RK06063
- Adventure Series rear lower control arm, Rock Krawler RKSRK06063
- Solid steel tube, 1.625 inch, bent for ground clearance
- Pro-Flex joints at each end, greasable and rebuildable
- Lists fit for the 2007–2018 and 2019 Jeep Wrangler
SKU: RKSRK06063 -
Control Arms
Rock Krawler Adventure Series Front Lower Control Arms – RK06060
- Adventure Series lower control arm, Rock Krawler RKSRK06060
- Made of 1.625 inch solid steel, bent for ground clearance
- Pro-Flex joints at each end for vibration isolation
- Greasable and rebuildable joints
- Fits the 2007–2018 Jeep Wrangler (JK)
SKU: RKSRK06060 -
Control Arms
Rock Krawler Adjustable Front Upper Control Arms – RK00124
- Adjustable front upper control arm, Rock Krawler RKSRK00124
- Lists fit for the 1997–2006 Jeep Wrangler TJ and 2004–2006 Wrangler LJ Unlimited
- Rebuildable spherical joint at the axle and Pro Flex joint at the frame
- Adjusts axle positioning and caster or pinion angle
- Solid alloy steel with a lifetime warranty
SKU: RKSRK00124 -
-
-
Control Arms
Rancho Performance Upper Control Arm Upgrade Kit – RS64501
- Front upper control arm upgrade, tubular steel, for lifted or leveled trucks
- Fits 2009–2020 Ford F-150
- Pre-installed replaceable ball joint, urethane pivot bushings, zerk fittings
- Part number RANRS64501, direct bolt-on fit
SKU: RANRS64501 -
-
-
Why control arms matter on a lifted vehicle
When a vehicle is lifted, factory control arms often cannot return the axle or wheel to the correct position. That can cause poor alignment, wandering, vibration or running out of travel at the joints. Aftermarket arms restore alignment range and sometimes improve articulation. Short arms and drop brackets are common on mild lifts, while long arms are designed for taller lifts and offroad use.
How to choose
Start with the position you need: front or rear, upper or lower. Each is specific to the suspension layout, so an arm for a coil-spring solid axle Jeep is nothing like an upper arm for an independent front suspension truck. Then match the arm to your lift height range, shown in the listing, because the arm length and geometry are built for that window.
- Adjustable arms: Let you set caster or pinion angle, which is important after a lift.
- Fixed-length arms: Simple and strong, but they only fit the range they were designed for.
- Replacement arm with bushings: A good choice when factory bushings are worn out.
Specs to compare
Look at the joint design. Rubber or polyurethane bushings are quiet and forgiving, while heim or spherical joints give more articulation and need more maintenance and tolerate more noise. Ball joint designs on upper arms for independent front suspension trucks, including billet and tubular styles, are tied to the vehicle's steering geometry. Also check material, whether the kit includes bushings or hardware, and the stated lift range. Replacement joint kits are sold separately for rebuilding worn arms.
Installation notes and alignment
Control arms are a suspension and steering safety item. Torque bolts to the manufacturer's specifications with the vehicle at ride height, since tightening bushing bolts with the suspension hanging can bind the rubber and shorten its life. Install pairs rather than single arms, and have a professional alignment done after any arm change.
Check that the track bar, brake lines, sway bar links and driveline angles still work with your lift. Confirm fitment for your exact year, make, model, drivetrain and lift height, and follow the manufacturer's specifications for any additional parts required. Inspect joints and bolts regularly if the vehicle sees trail use.
Matching parts and common mistakes
Control arms rarely work alone. A lift that needs new arms often also needs a track bar, longer brake lines, sway bar disconnects or extended links, and shocks sized for the new travel. Plan the full list before starting so the vehicle is not left half finished. A set that includes the correct bushing sleeves and hardware saves a trip to find missing parts.
A common error is tightening arm bolts with the suspension at full droop, which preloads the bushings and can tear them within a short time. Another is mixing arms of different lengths side to side, which shifts the axle off center. Do not reuse stretched or damaged hardware, and use the grade of bolt the manufacturer requires.
For upkeep, inspect arms for bends, cracks near the welds and play in the joints. Grease any joints with fittings on the schedule listed. Listen for clunks over bumps, which often signal a loose bolt or a worn bushing. Recheck torque after the first few hundred miles, since bushings settle.
Related guides
- Control Arms Explained: Fixed, Adjustable or Long Arm
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Popular Control Arms brands
- Rubicon Express (46)
- TeraFlex (30)
- Pro Comp Suspension (23)
- Fabtech (20)
- Crown Automotive (19)
- ICON Vehicle Dynamics (19)
- Icon Suspension (19)
- Rock Krawler (17)
- Skyjacker (9)
- Omix-Ada (9)
- Rough Country (9)
- Tuff Country (8)
Control Arms FAQ
Do I need adjustable control arms for a lift?
Not for every lift. Mild lifts may work with factory or fixed-length arms. Taller lifts often need adjustable or longer arms to restore caster and pinion angle. Check the lift height range stated in the listing.
What is the difference between bushings and heim joints?
Bushings use rubber or polyurethane and are quiet and low maintenance. Heim or spherical joints allow more articulation but can be louder and need more upkeep. The right choice depends on how the vehicle is used.
Do I need an alignment after installing control arms?
Yes, plan on one. Changing arms alters wheel position and angles. A professional alignment sets caster, camber and toe so the vehicle tracks properly and tires wear evenly.
Can I replace only the worn joints instead of the whole arm?
Sometimes. Joint rebuild kits exist for certain arms, but they require pressing or the right tools. If the arm is bent or the bushing sleeve is damaged, replacement arms are the safer route.















