Overview
The Moog RK621608 is a front left upper control arm and ball joint assembly for the 2011–2015 Dodge Durango and the 2011–2015 Jeep Grand Cherokee (WK). Moog sells it as a complete assembly with the ball joint already in place, which is the main difference from buying a control arm and ball joint separately.
The assembly has precision tolerances for easy installation and steering alignment. Its coated studs and e-coated cast iron and steel control arm are designed to resist salt, road grime and oils, and the parts are heat treated to meet or exceed original equipment requirements.
Key features
- Pre-installed ball joint with a sealed socket
- Optimized bushings for quiet operation and wear resistance
- Ball stud shape designed for fatigue life and compensation for sag
- Heat treated parts
- Coated studs and e-coated control arm designed to inhibit premature deterioration
Upper arm wear signs
The upper control arm holds the top of the wheel in position and works with the ball joint to steer and absorb bumps. Over time the bushings and ball joint can develop play, which shows up as wandering on the highway, a light knock over rough surfaces or uneven tire wear along the inside or outside edge. Lift the wheel with the vehicle safely supported and check for movement at the joint.
A new upper assembly often prompts a check of related parts. Inspect the front shock mounts, the sway bar links and the tie rod ends while the suspension is open. After installation, have the caster and camber checked, since they set how the tire tracks and how the steering returns to center.
- Check the boot on the joint for tears
- Look for play when the wheel is lifted
- Inspect the sway bar links at the same time
Specifications
| Brand | Moog |
|---|---|
| Part number | RK621608 |
| Position | Front left, upper |
| Assembly | Control arm and ball joint |
| Control arm type | Box |
| Control arm material | E-coated cast iron and steel |
| Ball joint | Pre-installed, sealed socket |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2015 Dodge Durango (Citadel, Crew, Express, Heat, Limited, R/T, Rallye, SXT and Special Service) and the 2011–2015 Jeep Grand Cherokee (WK) (Laredo, Limited, Overland, Overland Summit, SRT, SRT8 and Summit).
The list does not include the 2016 and later Durango or Grand Cherokee, or the front right upper position, which is a separate part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a control arm and ball joint changes the wheel alignment, so have the caster and camber checked once the assembly is installed.
What’s included
The kit is one front left upper control arm and ball joint assembly, with no separate hardware included.










