Overview
The Rancho RS64501 is a front upper control arm upgrade for 2009–2020 Ford F-150 trucks. Rancho designs it as a direct, bolt-on tubular steel arm for leveled or lifted trucks. The arm is engineered to keep the ball joint in its normal operating range and adds wheel travel and caster compared with factory control arms on lifted applications.
Each arm has a pre-installed, replaceable ball joint and urethane control arm pivot bushings. Zerk fittings allow greasing, which helps keep the arm quiet in use.
Key features
- Tubular steel upper control arm
- Direct, bolt-on fit for 2009–2020 F-150
- Pre-installed replaceable ball joint
- Urethane control arm pivot bushings
- Zerk fittings for lubrication
- Front upper position
Ball joints and upper arms
An upper control arm links the axle to the frame and keeps the wheel in position as it moves up and down. On a lifted or leveled truck the upper arm angle changes, so a stronger arm with a replaceable ball joint can help keep the joint in its normal operating range. Ball joint wear shows as steering play or clunks, and it is worth checking the joint whenever the arm is replaced.
Tubular steel arms are often chosen for their rigidity under load, but any new arm still needs a fresh alignment and a check of the other front end parts. Inspect the bushings, frame mounts and steering linkage during the install. Grease the zerk fittings at regular intervals, and check the ball joint boots for tears.
- Grease the zerk fittings at regular intervals
- Check ball joint boots for tears
- Set alignment after installation
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS64501 |
| Position | Front upper |
| Construction | Tubular steel |
| Ball joint | Pre-installed, replaceable |
| Pivot bushings | Urethane |
| Lubrication | Zerk fittings |
| Fitment type | Direct fit, bolt-on |
Vehicle fitment
It fits the 2009–2020 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, Police Responder, SSV, STX, XL and XLT trims.
Ford F-150 models from before 2009 and after 2020 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a control arm, alignment is needed after installation. Caster is one of the settings Rancho says these arms help with.







