Overview
The Pro Comp Suspension 57015B is a Pro Series front upper control arm for the 2003 to 2024 Toyota 4Runner. It is a tube arm with a high angle ball joint, designed to keep the strength of a race-style uni-ball arm while riding more like factory parts on the road.
The arms give increased strength and travel, and they are built with corrected geometry and alignment for a lifted vehicle. The arm is made for several 4Runner trims, from the SR5 and Limited to the TRD Pro and Trail models.
Key features
- High angle ball joint for increased strength and travel
- Corrected geometry and alignment after lift
- PTMEG bushings for low maintenance
- Helix grooved pivot points
- Sealed dust cap for quiet performance over time
Upper arm role in a lift
The upper control arm sets part of the camber and caster angles, and it works with the lower arm to control the wheel’s movement through its travel. When the truck is lifted, the upper arm angles change, which is why corrected geometry matters for handling and tire wear. A tube arm with a high angle ball joint is built to hold those angles under load.
PTMEG bushings are designed to need little routine attention, but they still wear over time. Inspect the bushings and the dust cap at each service, and look for cracks or grease leaks. The ball joint should move smoothly through the full range of travel before the truck is driven.
- Check ball joint for play at each service
- Inspect dust cap for tears
- Look for uneven inner tire wear
- Re-check alignment after replacing an upper arm
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP57015B |
| Position | Front upper |
| Type | Tube |
| Joint design | Ball joint, high angle |
| Bushings | PTMEG |
| Pivot points | Helix grooved |
| Dust cap | Sealed |
Vehicle fitment
It fits the 2003 to 2024 Toyota 4Runner in Limited, Nightshade, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Trail and Venture trims.
It is designed for the 4Runner; match your year and trim before buying.
Installation notes
Pro Comp designs this arm with corrected geometry for a lifted vehicle, so check the alignment after installation. Inspect the high angle ball joint and the arm’s clearance through the full range of suspension travel before driving.
What’s included
One front upper control arm under part number 57015B.













