Overview
The Rock Krawler RKSRK06695D is the driver side rear upper control arm in the Adventure Series. It is a direct-fit part for the 2007–2018 Jeep Wrangler (JK), in 2-door and Unlimited 4-door models.
Key features
- Rear upper position, driver side
- Adventure Series design
- Direct fit for the 2007–2018 Jeep Wrangler (JK)
Rear upper arm basics
The rear upper control arm links the axle to the frame above the axle centerline and helps control axle movement and wheel travel. It also affects pinion angle, so arm position matters for driveline smoothness. Because each side has its own arm, the driver side and passenger side are separate parts that work as a matched pair.
Rear upper arms are often replaced in pairs when one side shows wear, since the other side carries the same load. Inspect the joints for play and the arm for bends after trail use. A worn joint usually shows as clunking over bumps or uneven tire wear on the rear axle.
- Inspect both sides before ordering
- Check pinion angle after the arm is installed
- Look for cracked welds at the arm ends
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK06695D |
| Position | Rear upper, driver side |
| Fitment type | Direct fit |
Vehicle fitment
Covered trims include Sport, Sahara, Rubicon and X, along with the anniversary editions. The fit covers 2-door and Unlimited 4-door bodies.
The JL, the Gladiator, and the earlier TJ and LJ are outside this fit. Check your year, model and trim before buying.
Installation notes
Because this is a rear upper control arm, check the pinion angle and alignment after it is installed.
What’s included
One rear upper control arm, driver side.









