Overview
The Moog RK621607 is a front right upper control arm and ball joint assembly for the 2011–2015 Dodge Durango and the 2011–2015 Jeep Grand Cherokee (WK). The ball joint comes installed in the assembly, so the upper joint is supplied as one unit rather than as separate parts.
The assembly is precision built for easy installation and accurate steering alignment. Its ball stud is shaped to resist fatigue and compensate for sag, and the e-coated control arm is designed to hold up against road salt and grime.
Key features
- Pre-installed ball joint with a sealed socket
- Optimized bushings for quiet operation
- Ball stud shape for fatigue life and compensation for sag
- Heat treated to match or exceed OE requirements.
- Coated studs and e-coated control arm
Upper joint and alignment
The upper joint sets the top of the steering axis, so its position affects how the front wheel tracks and returns to center. Road salt, grit and wet conditions speed up wear on joints and boots, and a sealed joint still needs periodic inspection for play. Lift the wheel with the vehicle safely supported and check for movement, and look at the boot for tears or hardening.
Replacing the upper assembly is a good moment to inspect the lower arm, the shock mounts and the steering linkage. Once the new upper arm is installed, have the caster and camber checked, because the upper position influences both. Tighten all fasteners to specification and recheck them after the first drive.
- Inspect the boot for cracks or tears
- Check for play with the wheel lifted
- Have caster and camber checked afterward
Specifications
| Brand | Moog |
|---|---|
| Part number | RK621607 |
| Position | Front right, upper |
| Assembly | Control arm and ball joint |
| Control arm type | Box |
| Control arm material | E-coated cast iron and steel |
| Ball joint | Pre-installed, sealed socket |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2015 Dodge Durango (Citadel, Crew, Express, Heat, Limited, R/T, Rallye, SXT and Special Service) and the 2011–2015 Jeep Grand Cherokee (WK) (Laredo, Limited, Overland, Overland Summit, SRT, SRT8 and Summit).
The list does not include the 2016 and later Durango or Grand Cherokee, or the front left upper position, which is covered by the RK621608. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the assembly sets the upper joint position, the caster and camber should be checked after installation.
What’s included
Only the front right upper control arm and ball joint assembly is included, without separate hardware.










