Overview
The Pro Comp Suspension 51041B is a Pro Series front upper control arm for 2014 to 2018 Chevrolet Silverado 1500, Tahoe and Suburban, and GMC Sierra 1500, Yukon and Yukon XL vehicles. It is a tube arm with a ball joint and is built to replace the factory upper control arm on a lifted truck.
The arm pairs the strength of a race-style uni-ball arm with the ride quality of factory parts. It uses a newly designed high angle ball joint, which gives increased strength and travel, along with corrected geometry and alignment after the vehicle is lifted.
Key features
- High angle ball joint for increased strength and travel
- Corrected geometry and alignment after lift
- Low maintenance PTMEG bushings
- Helix grooved pivot points
- Sealed dust cap for lasting quiet performance
- Designed for on-road ride without the noise of traditional uni-ball arms
Ball Joint Wear and Inspection
The upper control arm connects the axle to the frame and works with the lower arm to control the wheel’s movement. The ball joint at the outer end lets the axle move up and down and turn, so its condition has a direct effect on steering and braking feel. A high angle ball joint is designed to allow greater joint angles than a standard joint.
Wear shows up as a clunk when the wheel is rocked, a loose steering feel, or uneven tire wear. Since the arm and its joint are often serviced together, check the lower arm, bushings and steering linkage at the same time. Keeping the dust cap intact helps the joint stay clean and lubricated over time.
- Rock the wheel top to bottom to check for play
- Look for torn or missing dust caps
- Check bushings and lower arm when replacing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP51041B |
| Position | Front upper |
| Type | Tube |
| Joint design | Ball joint, high angle |
| Bushings | PTMEG |
| Pivot points | Helix grooved |
| Dust cap | Sealed |
Vehicle fitment
It fits the 2014 to 2018 Chevrolet Silverado 1500 in Custom, High Country, LS, LT, LTZ, SSV and WT trims, the 2015 to 2018 Chevrolet Suburban, the 2014 Chevrolet Suburban 1500, the 2014 to 2018 Chevrolet Tahoe, the 2014 to 2018 GMC Sierra 1500, the 2014 to 2018 GMC Yukon, the 2015 to 2018 GMC Yukon XL and the 2014 GMC Yukon XL 1500.
It does not fit the 2019 and later Silverado 1500 or Sierra 1500, or the 2500 and 3500 trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The arm has corrected geometry for use after a lift, so check the alignment once it is installed. Because the ball joint is a high angle design, check joint and arm clearance through the full suspension travel before driving.
What’s included
One front upper control arm under part number 51041B.














