Switch Pods
Showing 13–24 of 76 resultsSorted by popularity
-
-
-
-
Switch Pods
Painless Wiring Trail Rocker Accessory Control System without Switches – 57005
- Fits 2007 to 2015 JK Wrangler, Rubicon, Sahara and Unlimited
- Relay center for up to eight accessories, without switches
- Eight 30-amp fuses and eight 30-amp relays
- Weatherproof power center on a powder-coated bracket
- Made in the U.S.A.
SKU: PWP57005 -
-
Switch Pods
SPOD 6 circuit Source System Remote Control Power Module – RCPM
- Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited, 2 and 4-door
- Wireless smartphone control of the sPOD power distribution system
- Bluetooth 4.0 smart, general range up to 25 feet
- Includes transceiver and interface cable
SKU: PODRCPM -
Switch Pods
SPOD 6 Switch System with Contura Rocker Switches & Source System – BLUE-LED-MOMENT
- Fits 2012 to 2016 Jeep Wrangler JK, 2-door and 4-door
- Six double light LED Contura rocker switches, installed and pre-wired
- Switch LED colors: red, green, blue and amber
- Air pressure gauge and power distribution module not included
SKU: PODBLUE-LED-MOMENT -
-
-
Switch Pods
SPOD Bantam with Touchscreen and 84″ Battery Cables – BAN8-700-TSB-36
- Universal fit, not built for one vehicle
- 8 expandable circuits for 12/24VDC accessories
- One ethernet cable carries control into the cab
- Low voltage shutoff below 11.2VDC
- Touchscreen version with 84-inch battery cables
SKU: PODBAN8-700-TSB-84 -
Switch Pods
SPOD Bantam with Touchscreen and 36″ Battery Cables – BAN8-700-TSB-36
- Universal fit, not built for one vehicle
- 8 expandable circuits for 12/24VDC accessories
- One ethernet cable carries control into the cab
- Low voltage shutoff below 11.2VDC
- Touchscreen version with 36-inch battery cables
SKU: PODBAN8-700-TSB-36
What a switch pod does
Off-road builds add many electrical accessories: light bars, rock lights, air compressors, winches and cameras. A switch pod puts the controls in one panel, usually near the driver, and ties them to a relay-based control unit under the hood or dash. This keeps current-carrying wires away from the cabin and reduces the clutter of individual switches added in random places.
Types of systems
- Vehicle-specific kits are shaped to fit the dash or console of particular models, such as a Wrangler TJ or a Tacoma. They often use factory mounting points for a clean look.
- Universal panels and bezels mount in a bracket, roll bar or console, and suit custom builds.
- Control systems use a power module that handles the high-current switching. Some are driven by a touchscreen or a small switch panel.
- Harnesses and accessories include extension wiring, battery cables and mounts for tablets or screens.
What to compare
- Number of switches: count the accessories you run now, then add a few spare circuits for future upgrades.
- Current rating: every circuit and the main feed have a maximum amperage. Add up what you will connect and stay below the rating.
- Switch type: rocker, toggle, momentary or programmable. Momentary functions suit horns and winch-style actions.
- Environmental protection: consider whether the control module is sealed against moisture if it will be under the hood.
- Illumination: backlit switches help at night, but check that the brightness is adjustable.
Installation notes
Disconnect the battery before starting work. Use properly sized wire for the load, a fuse or breaker near the battery, and weatherproof connectors where wires pass through the firewall. Route wiring away from heat and moving parts, and use grommets to protect it at pass-throughs. Test each circuit before closing up the dash. Systems that connect to a vehicle's factory harness should be confirmed against the wiring information for your exact year, make and model. If wiring is unfamiliar, have an automotive electrician perform the installation.
Labeling and upkeep
Label each switch clearly, since a panel full of identical rockers is easy to misread in the dark. Periodically check connectors for corrosion, confirm that fuses are the right rating and keep a spare set of fuses in the vehicle.
Planning and common mistakes
Before buying a system, make a list of every accessory you expect to run now and in the future. Write down the amperage of each, since that determines wire size, fuse size and the control unit's capacity. Pods are easier to install when you choose a mounting location first. Consider whether the driver can reach the switches comfortably without taking eyes from the road, and whether passengers or seat belts could accidentally hit them.
- Do not share one circuit between large loads. A pair of light bars and a compressor should not run off the same fused lead.
- Do not skip the main fuse. Place a fuse or breaker near the battery on the feed wire, because a short anywhere along the run could otherwise ignite insulation.
- Do not rely on tape. Use heat-shrink connectors or sealed terminals, particularly in the engine bay.
- Keep ignition-switched and constant power separate if you do not want accessories draining the battery when parked.
Popular Switch Pods brands
- SPOD (40)
- Rugged Ridge (16)
- Daystar (8)
- Advanced Accessory Concepts (8)
- Painless Wiring (8)
- ARB 4x4 Accessories (6)
Switch Pods FAQ
Do I need a switch pod to run off-road lights?
No, individual switches and relays work too. A switch pod simply organizes controls in one place and often includes the relays and fusing, which can make wiring cleaner and easier to expand later.
Can a switch pod handle an air compressor or winch?
Only if the circuit rating supports the draw. Compressors and winches pull high current, so check the amp rating of the module and wiring, and consider wiring them directly through a dedicated relay and breaker.
Will a vehicle-specific pod fit my dash?
Vehicle-specific kits are shaped for particular models and years, and dash designs change. Confirm the listed fitment for your exact year, make and model before choosing a part number.
Is installation difficult?
Basic kits need simple hand tools, a fuse and clean wiring. The main risks are undersized wire, poor connections and missing fuses. If you are unsure about automotive wiring, use a qualified installer.









