Overview
The SPOD 8 Circuit SE System with HD Switch Panel, part number 8-800-HD-UNI, is a switch and power control system with a maximum 100 amp capacity. The sPOD SourceSE at its center is a fully programmable digital system controlled over CAN-Bus.
The system uses automotive grade approved, high-power, high-temp and ultra-reliable components. It is engineered and 100% manufactured in the United States, and it is a universal application.
Key features
- Maximum 100 amp capacity
- Automotive grade approved, high-power, high-temp, ultra-reliable components
- Fully programmable digital CAN-Bus control through the sPOD SourceSE
- Engineered and 100% manufactured in the United States.
- Installation hardware is OEM vehicle specific.
Wiring for a 100 amp system
A system rated to 100 amps places real demands on the wiring, so the cable size, fuse and connections need to match the load. Route heavy cables with protection from heat and sharp edges, keep them away from moving parts, and make each connection clean and tight. Undersized wire can overheat long before a fuse blows, so size conductors for the full rated current and keep runs as short as practical.
A programmable controller makes it easy to add functions later, but every added load should be checked against the total current the system will carry. Keep a written list of circuits and their current draws, and test the system with the engine running before relying on it off road. Inspect connectors and cable jackets periodically for heat marks or chafing, and replace any part that shows damage rather than covering it up.
- Fuse each circuit close to the battery
- Keep a written circuit list
- Inspect cable jackets for chafing
Specifications
| Brand | SPOD |
|---|---|
| Part number | 8-800-HD-UNI |
| UPC | 700008014621 |
| Maximum capacity | 100 amp |
| Control | Fully programmable digital, CAN-Bus |
| Power module | sPOD SourceSE |
| Made in | United States |
| Fitment | Universal Fit |
Vehicle fitment
The system is a universal application, so it is not tied to a particular make, model or year. The installation hardware is OEM vehicle specific, so check it against your vehicle before ordering.
No vehicle is named, so a match for your model cannot be confirmed here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the vehicle specific hardware to your mounting points first. A system rated to 100 amps needs fusing and cable sized for that load, and the battery should be disconnected before power connections are made.
What’s included
Confirm the switches, leads and hardware included before ordering.
















