Overview
The SPOD 1997–2002 TJ Wrangler 6 Switch System, part 500-97, is a plug-and-play kit that pairs six switches with a fused, relayed power block for the 1997 to 2002 Jeep Wrangler TJ. Each accessory connects to the block rather than to the vehicle’s own circuits.
Six Bosch-style cube relays, rated SPST 40 amp and plugged into the block, switch each accessory. A 12-position terminal block gives you the connection points, and six ATO fuses (three 15 amp and three 30 amp) protect the circuits. Six diodes help keep sensitive lights from reacting badly when a relay switches off. The kit is pre-wired and ready to install, and its battery leads are 8 gauge.
Key features
- Two red, two amber and two green switches
- Six plug-in Bosch-style relays, SPST 40 amp each
- Three 15 amp and three 30 amp ATO fuses supplied
- Six diodes to protect LED lights from field collapse
- 12-position accessory terminal block
- Inline 50 amp manual-reset breaker in the main feed
- Low-voltage cutoff at 10.6 VDC, cutting back in at 12.4 VDC
- Fuse for the LVCO, which can be removed to bypass the cutoff
Wiring and battery protection
A switch system like this sends power to accessories through relays and fuses, so the main battery feed and its protection matter as much as the switches themselves. The inline breaker in the main feed guards the whole system, and each accessory should have a fuse rated for the load it runs. Route the battery leads away from moving parts and keep the terminals clean and tight.
A low-voltage cutoff protects the battery from being drained by accessories, which helps when the vehicle sits for long periods. Bypassing it removes that protection, so keep the fuse in place unless you have another way to watch battery voltage. Accessories often wired to a switch panel include lights, winches, compressors and auxiliary fans.
- Match each fuse to the accessory’s rated load
- Keep the battery leads short and protected
- Recheck terminal tightness after the first few trail runs
- Ground accessories to clean bare metal
Specifications
| Brand | SPOD |
|---|---|
| Part number | 500-97 |
| UPC | 700006892201 |
| Switches | Two red, two amber, two green |
| Relays | Six Bosch-style cube, SPST 40 amp, plug-in |
| Fuses | Six ATO: three 15 amp, three 30 amp |
| Breaker | Inline 50 amp, manual reset |
| Diodes | Six |
| Battery leads | 8 gauge with crimped and soldered terminal |
Vehicle fitment
This kit fits the 1997 to 2002 Jeep Wrangler TJ.
Wrangler LJ and JK models, and TJ model years from 2003 to 2006, are outside the stated years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system arrives pre-wired. Its power leads are 8 gauge with crimped and soldered terminals for the battery connection, and the LVCO fuse can be pulled if you want the cutoff bypassed.
What’s included
You get the block with its terminal block, six relays, six fuses, the inline breaker, six diodes, the 8 gauge battery leads and the switch set of two red, two amber and two green switches.
































