Overview
The SPOD Ram Mount Switch Panel, part number 700-RAM, is a six switch panel with a 1-inch ram mount ball on its base. It mounts to the top of a fuse box and can be removed and put away when not in use.
It is a universal application, so no specific vehicle applies.
Key features
- Six switch panel with a 1-inch ram mount ball
- Switches installed and wired for plug and play
- Removable when not in use
- 12 position terminal block for accessory attachment
- Six dual 24v LED Contura rocker switches
- Six ATO style fuses supplied
Keeping a fused switch panel tidy
A switch panel on a ram mount is convenient because you can position it where you can reach it from the seat. The ball base lets you tilt and turn it, but keep the arm tight so the panel does not shift on rough trails. Check the mount each time before a trip.
Clean wiring prevents most problems with fused panels. Keep power leads short, secure them away from heat and moving parts, and make sure fuses sit firmly in their holders. Remove the panel and check the connections periodically, especially after rough driving or mud exposure.
- Tighten the ram mount arm after each adjustment
- Keep fuses matched to the accessory they protect
- Inspect power leads for chafing after off-road use
- Store the panel out of direct sun when removed
Specifications
| Brand | SPOD |
|---|---|
| Part number | 700-RAM |
| UPC | 700007270261 |
| Mount | 1-inch ram mount ball |
| Switches | Six dual 24v LED Contura rocker switches |
| Terminal block | 12 position |
| Power leads | 8 gauge, crimped and soldered |
| Fuses | Six ATO style: three 15 amp and three 30 amp |
| Installed location | Top of fuse box |
Vehicle fitment
The panel is a universal application, with no make, model or year tied to it. Check that your vehicle has room for the panel on top of its fuse box before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for some cutting and drilling before mounting the panel to the top of the fuse box. The power leads are crimped and soldered for battery connection, so make those connections with the battery disconnected.
What’s included
Included: the six switch panel with its 1-inch ram mount ball, six dual 24v LED Contura rocker switches installed and pre-wired, a 12 position terminal block, 8 gauge power leads, and six ATO style fuses.
Not included: Mounting brackets and hardware are not included. Check the package contents before installing.















