Overview
The SPOD Truck Mini Bezel, part number 700-MINI, is a 7 inch mini switch panel that mounts to the top of a fuse box. It arrives with six dual 24v LED Contura rocker switches installed and pre-wired, plus a 12 position terminal block and power leads for the battery.
It is a universal application, so no specific vehicle is named. Some cutting and drilling is required during mounting.
Key features
- Includes a 7 inch mini switch panel
- Six dual 24v LED Contura rocker switches installed and pre-wired
- 12 position terminal block for accessory attachment
- Plug and play, with no extra wiring required
- All wires wrapped in high temp abrasion resistant nylon braided sleeving
- Six ATO style fuses supplied
Planning the fuse box mount
Mounting a switch panel on top of a fuse box means working in a tight space, so measure the clearance before cutting anything. Look for hood latches, wiring bundles, brackets and heat sources that could interfere with the panel or the wires behind it. Test-fit the panel with the wiring routed loosely, then mark the cut lines. A dry fit prevents damage to the fuse box and leaves room to route the leads cleanly.
Once mounted, the six fuses protect each accessory circuit, so the fuse ratings should match the loads you plan to run. Keep each switch labeled so you know which circuit it controls, and route accessory wires away from moving parts and sharp edges. Before final installation, test each switch with the battery connected and the accessory off, then tighten all terminals and secure the sleeving.
- Measure clearance before cutting
- Match each load to its fuse rating
- Label every switch
Specifications
| Brand | SPOD |
|---|---|
| Part number | 700-MINI |
| UPC | 700007200451 |
| Panel | 7 inch mini switch panel |
| Switches | Six dual 24v LED Contura rocker switches |
| Terminal block | 12 position |
| Power leads | 8 gauge, crimped and soldered |
| Fuses | Six ATO style: three 15 amp and three 30 amp |
| Mounting | Top of fuse box |
Vehicle fitment
Fit is universal, so it is not matched to a make, model or year. Measure the space on top of your fuse box before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some cutting and drilling is required, so measure the mounting space before starting. The panel arrives with switches installed and wired, so the main job is mounting it and connecting the 8 gauge power leads to the battery.
What’s included
Included: the 7 inch mini switch panel with six switches installed and wired, the 12 position terminal block, 8 gauge power leads, and six ATO style fuses (three 15 amp and three 30 amp).
Not included: mounting brackets and hardware, so plan for those parts before starting.
















