Overview
The SPOD 2003–2006 TJ/LJ Wrangler 6 Switch System, part 500-03, is a complete plug-and-play power distribution kit with six switches for the 2003 to 2006 Jeep Wrangler TJ and LJ. It combines a fused and relayed power block with a six-switch panel, so each accessory you add runs on its own protected circuit without a separate relay build for each one.
The block carries a 12-position terminal block for attaching accessories, six plug-in Bosch-style cube relays rated SPST 40 amp, and six ATO fuses, three of them 15 amp and three 30 amp. An integrated low-voltage cutoff watches battery voltage and protects the starting charge, which matters when an accessory has been left switched on.
Key features
- Six switches: two red, two amber and two green
- Six plug-in Bosch-style cube relays, SPST 40 amp
- Six ATO fuses: three 15 amp and three 30 amp supplied
- Six diodes that guard sensitive accessories, such as LED lights, from field collapse
- 12-position terminal block for accessory attachment
- Inline 50 amp manual-reset circuit breaker
- Low-voltage cutoff at 10.6 VDC that cuts back in at 12.4 VDC
- Pre-wired and ready to install
Wiring the accessories
A power distribution system centralizes accessory wiring, so each accessory runs through its own fused relay rather than tapping the vehicle’s wiring. Plan the layout before mounting the block: group accessories by switch color, keep high-draw items on the heavier fuses, and leave room for the terminal block and breaker to be reached.
Because the system includes a low-voltage cutoff, it can protect the starting battery when accessories are left on. Keep the battery terminals clean and tight, and check the power leads for chafing where they pass through the firewall or frame. Diodes help with LED stability, but flicker can also come from poor grounds, so check those first.
- Route leads away from moving parts and heat
- Use a solid ground connection for every accessory
Specifications
| Brand | SPOD |
|---|---|
| Part number | 500-03 |
| UPC | 700006892219 |
| Switches | Two red, two amber, two green |
| Relays | Six plug-in Bosch-style cube, SPST 40 amp |
| Fuses | Six ATO: three 15 amp, three 30 amp |
| Circuit breaker | Inline 50 amp, manual reset |
| Low-voltage cutoff | Off at 10.6 VDC, back on at 12.4 VDC |
| Terminal block | 12 position |
| Power leads | 8 gauge, crimped and soldered terminals |
Vehicle fitment
This system fits the 2003 to 2006 Jeep Wrangler TJ. It also fits the LJ for its 2004 to 2006 production years.
Earlier TJ years and all Wrangler JK models are outside this system’s stated years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system is pre-wired, and its 8 gauge power leads connect to the battery through crimped and soldered terminals. The fuse that runs the low-voltage cutoff can be removed if you need to bypass the LVCO function.
What’s included
The kit contains the 12-position power block, six relays, six fuses, the 50 amp breaker, six diodes, the 8 gauge battery leads and the six switches: two red, two amber and two green.













