Overview
The SPOD 2009–2015 JK Wrangler 6 Switch System with Air Gauge, part 610-0915, is a fused and relayed power block with six switches for the 2009 to 2015 Jeep Wrangler JK. This is the air gauge version. The block is designed as a plug-and-play system, so accessories hook to its relays and terminal block.
Six plug-in Bosch-style cube relays rated SPST 40 amp switch the accessories, and six ATO fuses, three 15 amp and three 30 amp, protect them. A 12-position terminal block provides the connection points, and an inline 50 amp manual-reset breaker protects the main feed. Six diodes guard sensitive accessories, such as LED lights, from field collapse.
The integrated low-voltage cutoff keeps battery charge for starting. It cuts off at 10.6 VDC and cuts back in at 12.4 VDC, so an accessory left on does not leave the vehicle unable to start. A fuse for the LVCO can be removed to bypass the cutoff.
Key features
- Air gauge version, identified by the product name
- Six plug-in Bosch-style relays, SPST 40 amp
- Six ATO fuses: three 15 amp and three 30 amp
- Six diodes that guard sensitive accessories from field collapse
- 12-position terminal block for accessories
- Inline 50 amp manual-reset breaker
- Integrated LVCO, off at 10.6 VDC and back on at 12.4 VDC
- Removable LVCO fuse for bypassing the cutoff
- Two red, two amber and two green switches
Choosing a switch layout
Six switches give a lot of room, but the way they are arranged on the dash matters for daily use. Group the switches for lights together and keep the ones for air tools or pumps where they are easy to reach without looking. Color coding helps, and the two red, two amber and two green switches can be assigned to suit the accessories you run most often.
When you plan the layout, think about which accessories need power with the engine off and which should shut down with the ignition. The low-voltage cutoff protects battery charge for starting, so heavy loads belong on circuits you switch off when parked. Route each relay’s accessory wiring so the cable runs stay short and clear of hot parts.
- Group light switches together
- Keep air tool switches within easy reach
- Use the color of each switch to mark its job
Specifications
| Brand | SPOD |
|---|---|
| Part number | 610-0915 |
| UPC | 700007185471 |
| Version | With air gauge |
| Switches | Two red, two amber, two green |
| Relays | Six plug-in Bosch-style cube, SPST 40 amp |
| Fuses | Six ATO: three 15 amp, three 30 amp |
| Breaker | Inline 50 amp, manual reset |
| Battery leads | 8 gauge, crimped and soldered terminal |
| Low-voltage cutoff | Off at 10.6 VDC, back on at 12.4 VDC |
Vehicle fitment
It is a version for the 2009 to 2015 Jeep Wrangler (JK). Check your Jeep’s model year against that range before ordering.
Wrangler TJ and LJ models, and JK years from 2007 to 2008 or from 2016 onward, are outside the stated years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system is pre-wired and ready to install. Its 8 gauge power leads attach to the battery with crimped and soldered terminals, so the battery connection is made with the leads supplied.
What’s included
The kit includes the power block with its terminal block, six relays, six fuses, the inline breaker, six diodes, the 8 gauge battery leads and the six switches, two red, two amber and two green. The air gauge version is identified by the title, so check the kit contents against it.














