Overview
The SPOD 8 Circuit SE System with HD Switch Panel, part 8-800-HD-JK, is an eight-circuit switch system for the 2007 to 2017 Jeep Wrangler JK, including Rubicon and Unlimited models in 2-door and 4-door bodies. The panel has a machined billet aluminum housing and is designed for harsh environments in all weather.
The SourceSE behind the panel is a fully programmable digital CAN-Bus module with a maximum capacity of 100 amps. It is engineered and manufactured in the United States. Each circuit is rated at 30 amps at 12.5 VDC, and the system can be expanded by daisy chaining to up to 32 circuits.
Key features
- Billet aluminum machined housing
- Silicone buttons with positive touch feedback
- Fully programmable digital control
- Eight circuits with an end-user terminal block for accessories
- Expandable to up to 32 circuits, with plug-and-play features
- Low-voltage cutoff battery protection circuit
- Protection from 1.5 to 30 amps applied automatically
- Shield receptacle for an optional Bluetooth module
Expanding the circuit set
The SourceSE module handles the switching, so the panel is the control point you touch. Plan the accessories before mounting the panel, since the eight circuits and the terminal block should match the loads you intend to run. Where more than eight accessories are wanted, the system can be expanded, and the extra circuits are worth planning for from the start.
Mounting location affects both reach and durability. Place the panel where it can be read from the driver’s seat without interfering with pedals, airbag covers or the steering column. Route the cable away from heat and moving parts, and leave some slack at the connector so the panel can be removed for service without strain on the wiring.
- Map each circuit to a clear function
- Keep high-current feeds on their own protected run
- Protect exposed connectors from water and road grime
- Recheck connections after the first few off-road trips
Specifications
| Brand | SPOD |
|---|---|
| Part number | 8-800-HD-JK |
| UPC | 700008014601 |
| Switch panel | Billet aluminum housing, silicone buttons |
| Circuit rating | 30 amps at 12.5 VDC each |
| Maximum capacity | 100 amps |
| Protection range | 1.5 to 30 amps |
| Circuits | Eight, expandable to 32 |
Vehicle fitment
Fits 2007 to 2017 Jeep Wrangler JK models, including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions, and the Unlimited versions of each, in 2-door and 4-door models.
Wrangler TJ and LJ models, and JK years outside 2007 to 2017, fall outside this fitment. Confirm the year, model and trim of your vehicle before ordering.
What’s included
The kit includes the eight-switch HD panel, the SourceSE module and the OEM vehicle-specific installation hardware. The optional Bluetooth module is a separate purchase.














