Overview
The SPOD 6 Switch sPOD, part number 620-0915, is a switch pod with a power block for accessory wiring. It is inferred to fit the 2009 to 2016 JK Wrangler, Rubicon and Unlimited in both 2-door and 4-door models.
The sPOD comes with a 12 position terminal block for connecting accessories, 8 gauge power leads for the battery, and six ATO style fuses. No extra wiring is needed, and the wires are wrapped in high temperature, abrasion resistant nylon braided sleeving.
Key features
- Fits 2009 to 2016 JK Wrangler, Rubicon and Unlimited, 2 and 4-door
- 12 position terminal block for accessory attachment
- 2-1/16-inch gauge hole
- Crimped and soldered 8 gauge power leads for the battery
- Wires wrapped in high temp abrasion resistant nylon braided sleeving
- Mounting brackets and hardware included
Sizing accessory circuits
The terminal block gives several attachment points for accessories, but the total load should stay within what the supplied fuses and power leads can carry. Before wiring, list each accessory and its expected draw, then assign circuits so high-current items are not grouped on one fuse. Keep the fuse ratings in mind when choosing replacement fuses later.
The sPOD is a switch pod, so switches and gauges can be mounted in its opening. Check the mounting location for clearance, cable routing and access to the switch wiring. Using the included brackets and hardware keeps the pod steady under vibration, and a periodic check of the screws helps prevent rattles.
- Total the accessory loads before wiring
- Match each fuse to its circuit
- Re-tighten brackets after rough trails
Specifications
| Brand | SPOD |
|---|---|
| Part number | 620-0915 |
| UPC | 700007270071 |
| Gauge hole | 2-1/16-inch |
| Terminal block | 12 position |
| Power leads | 8 gauge, crimped and soldered |
| Fuses | Six ATO style: three 15 amp and three 30 amp |
| Sleeving | High temp abrasion resistant nylon braided |
Vehicle fitment
It fits the 2009 to 2016 JK Wrangler, Rubicon and Unlimited, in 2-door and 4-door models.
The JL Wrangler and Gladiator generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The power leads have crimped and soldered terminals for connection to the battery. Mounting brackets and hardware are included, so the sPOD can be mounted without separate parts. Disconnect the battery before connecting the power leads.
What’s included
Included: mounting brackets and hardware, 8 gauge power leads, and six ATO style fuses (three 15 amp and three 30 amp).
Not included: Aeroforce gauge.












