Overview
The SPOD 2007–2008 JK Wrangler 6 Switch System, part 600-07, is a complete plug-and-play power distribution system with six switches for the 2007 and 2008 Jeep Wrangler JK. The fused and relayed block means each accessory runs on its own protected circuit, and the wiring is pre-done so the kit can be installed as delivered.
The power block provides a 12-position terminal block, six Bosch-style cube relays rated SPST 40 amp, and six ATO fuses, three at 15 amp and three at 30 amp. An integrated low-voltage cutoff stops the accessories from draining the battery below the point needed to start the vehicle. The relays, fuses and diodes described below make up the main components of the block.
Key features
- Two red, two amber and two green switches
- Six plug-in Bosch-style cube relays, SPST 40 amp
- Six ATO fuses: three 15 amp and three 30 amp supplied
- Six diodes that protect sensitive accessories such as LED lights from field collapse
- 12-position terminal block for accessories
- Inline 50 amp manual-reset breaker
- Integrated LVCO that cuts off at 10.6 VDC and cuts back in at 12.4 VDC
- Removable LVCO fuse for bypassing the cutoff
Choosing switch layout
Six switches only work well when each one is matched to a clear job. Group switches by use, such as lighting in one color and work accessories in another, so the panel is easy to read in the dark. Label each switch once the accessories are wired, and keep the labels consistent with the terminal block layout so the wiring can be traced without guesswork.
The relays are rated for the loads they switch, so accessory draw should be checked before connecting anything high-current. Large loads such as winches or compressors may need their own dedicated feed rather than a shared output. Sensitive LED lights may also benefit from the diodes in the block, which help limit issues when relays switch off.
- Plan the six circuits before drilling any mounts
- Keep signal wiring separate from high-current runs
- Check the fuse for each output before final testing
- Leave slack at the dash for future service
Specifications
| Brand | SPOD |
|---|---|
| Part number | 600-07 |
| UPC | 700006892080 |
| Switches | Two red, two amber, two green |
| Relays | Six plug-in Bosch-style cube, SPST 40 amp |
| Fuses | Six ATO: three 15 amp, three 30 amp |
| Breaker | Inline 50 amp, manual reset |
| Low-voltage cutoff | Off at 10.6 VDC, back on at 12.4 VDC |
| Terminal block | 12 position |
| Battery leads | 8 gauge, crimped and soldered |
Vehicle fitment
This kit fits the 2007 and 2008 Jeep Wrangler JK.
Wrangler TJ and LJ models and JK years from 2009 onward are outside the stated years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system is pre-wired. Its 8 gauge power leads attach to the battery with crimped and soldered terminals, and the LVCO fuse is removable if you need to bypass the cutoff.
What’s included
The kit includes the 12-position power block, six relays, six fuses, the 50 amp breaker, six diodes, the 8 gauge battery leads and the six switches: two red, two amber and two green.














