Overview
The SPOD 6 Switch sPOD and Source System with Genesis Adapter, part number 630-0915, is a switch and power distribution system with six dual 24v LED Contura rocker switches installed and pre-wired. It fits the 2009 to 2016 JK Wrangler, Rubicon and Unlimited.
Its 12 position terminal block accepts accessories, the 8 gauge power leads are crimped and soldered for battery connection, and six ATO style fuses are supplied (three 15 amp and three 30 amp). The wires are wrapped in high temp abrasion resistant nylon braided sleeving, and no extra wiring is required.
Key features
- Six dual 24v LED Contura rocker switches installed and pre-wired
- Genesis adapter for a Genesis G Screen
- 12 position terminal block
- No extra wiring required
- High temp abrasion resistant nylon braided sleeving on all wires
- Mounting brackets and hardware included
Using the Genesis adapter
The adapter is the connection point between the sPOD and the display, so plan its placement before routing any cable. Keep the path clear of the steering column and airbags, and confirm the display mounting will not block visibility or the controls you use while driving.
Pre-wired LED rocker switches reduce the amount of wiring you do yourself, but the accessory circuits still need correct connection. Use the terminal block positions in a planned order and label each circuit as you connect it. Check the switches and adapter after the first few drives, looking for loose plugs or heat near the connections.
- Plan the display location before cutting trim
- Keep cables clear of airbags and the steering column
- Label each accessory circuit
Specifications
| Brand | SPOD |
|---|---|
| Part number | 630-0915 |
| UPC | 700007270081 |
| Switches | Six dual 24v LED Contura rocker switches |
| Terminal block | 12 position |
| Power leads | 8 gauge, crimped and soldered |
| Fuses | Six ATO style: three 15 amp and three 30 amp |
| Genesis adapter | Included, for a Genesis G Screen (G Screen not included) |
Vehicle fitment
The Wrangler JK covered here runs from 2009 through 2016, including Rubicon and Unlimited versions in 2-door and 4-door bodies.
The JL and JT generations are not covered by this range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Genesis adapter is what connects a Genesis G Screen to this unit, and the G Screen must be obtained separately. Keep the battery leads disconnected until all accessory wiring is complete.
What’s included
Included: the sPOD and Source system with six pre-wired switches, the Genesis adapter, mounting brackets and hardware, and six ATO style fuses.
Not included: the Genesis G Screen.









