Overview
The SPOD 300-LSHS is a Low Side High Side adapter that lets external switches control SPOD’s 8-circuit SE switch pod systems. It expands what those systems can operate, including functions of the SPOD SourceSE.
The adapter simplifies remote switch installation and reduces installation and labor time with systems such as the Alpine head unit (KAC-001). It is a universal application, so it is not tied to a particular vehicle. It must be used together with SPOD SourceSE and one of SPOD’s 8-circuit controllers.
Key features
- Interface that lets external switches control 8-circuit SE systems
- Simplifies installation of remote switches
- Reduces installation and labor time with systems such as the Alpine head unit (KAC-001)
- Works with an 8-circuit controller: touchscreen, HD or switch panel
Remote switch wiring basics
Remote switches on an electrical accessory system are usually wired on either the low side or the high side of the load. A low side arrangement switches the ground path, while a high side arrangement switches the power path. An adapter like this one lets external switches work with a controller that expects a particular signal, so the switches can operate functions that would otherwise need a panel mounted at the dash. Knowing which side your switches use makes the wiring plan clearer before any cutting starts.
When choosing switches, consider where they will be mounted, how many functions you need, and how the wires will reach the controller without rubbing sharp edges or moving parts. Use weatherproof connectors at any point exposed to mud or water, and secure runs with clips. After installation, test each switch with the vehicle running and again with the engine off, then inspect connections periodically for corrosion or loose terminals.
- Mark each switch circuit at both ends
- Keep the adapter in a dry, ventilated spot
- Recheck connections after rough off-road use
Specifications
| Brand | SPOD |
|---|---|
| Part number | 300-LSHS |
| UPC | 700008512501 |
| Type | Low Side High Side adapter |
| Required components | SPOD SourceSE and one 8-circuit controller (touchscreen, HD or switch panel) |
Vehicle fitment
It is a universal application, so compatibility depends on the SPOD system it connects to rather than a make, model or year.
Confirm that your SPOD system is an 8-circuit SE setup with SourceSE and an 8-circuit controller before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.
Not included: SPOD SourceSE and an 8-circuit controller (touchscreen, HD or switch panel), which the adapter must be used with.









