Performance Axle Components
Showing 529–540 of 669 resultsSorted by popularity
-
Ring and Pinion Installation Kits
G2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB
Ring and Pinion Installation KitsG2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB
- Master kit with bearings for the Dana 30 (Jeep JK front, ARB Air Locker) axle, front
- For use in Jeep JK Dana 30 front with ARB Air Locker only
- Includes Timken pinion bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2050ARB -
Ring and Pinion Installation Kits
G2 Dana 44 Big Bearing Master Ring and Pinion Installation Kit – 35-2033B
Ring and Pinion Installation KitsG2 Dana 44 Big Bearing Master Ring and Pinion Installation Kit – 35-2033B
- Front Dana 44 master ring and pinion kit with big bearings, part number 35-2033B
- Fits 1994–1996 Ford F-150 and Bronco front axles
- Includes Timken pinion and carrier bearings with races
- Also named: 1991–2001 Dodge 1500 front axles
SKU: G/235-2033B -
Ring and Pinion Installation Kits
G2 GM 12 Bolt Car Master Ring and Pinion Installation Kit – 35-2019
Ring and Pinion Installation KitsG2 GM 12 Bolt Car Master Ring and Pinion Installation Kit – 35-2019
- Master kit with bearings for the GM 12 bolt car, 8.875-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2019 -
Ring and Pinion Installation Kits
G2 GM 14 Bolt 10.5 Inch 73 To 87 Master Ring and Pinion Installation Kit – 35-2023
Ring and Pinion Installation KitsG2 GM 14 Bolt 10.5 Inch 73 To 87 Master Ring and Pinion Installation Kit – 35-2023
- Master kit with bearings for the GM 14 bolt 10.5-inch axle, rear
- For use in 1973-1987 small bearing rear axles
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2023 -
Differential Covers
G2 Chrysler 9.25 Inch Ball Milled Aluminum Cover – 40-2028MB
- Rear cover for Chrysler 9.25 inch axles
- Cast lightweight aluminum body with a black powder coat
- Ball milled ribs and a heat treated, shot peened body
- Filler, fill level and drain plugs for service, plus a dipstick
SKU: G/240-2028MB -
-
Ring and Pinion Installation Kits
G2 Dana 80 Master Ring and Pinion Installation Kit – 35-2080
- Master kit with bearings for the Dana 80 axle
- Not for use in 1999 up Ford Super Duty dually
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2080 -
Ring and Pinion Installation Kits
G2 GM 8.5 Inch Front Master Ring and Pinion Installation Kit – 35-2021F
Ring and Pinion Installation KitsG2 GM 8.5 Inch Front Master Ring and Pinion Installation Kit – 35-2021F
- Master kit with bearings for the GM 8.5-inch (10 bolt) axle, front
- For use in 77-91 8.5-inch front axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2021F -
Ring and Pinion Installation Kits
G2 Ford 9.75 Inch 2000 Later Master Ring and Pinion Installation Kit – 35-2012A
Ring and Pinion Installation KitsG2 Ford 9.75 Inch 2000 Later Master Ring and Pinion Installation Kit – 35-2012A
- Master kit with bearings for the Ford 9.75-inch axle, rear
- For use in 2000 and newer axles only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2012A -
Ring and Pinion Installation Kits
G2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
Ring and Pinion Installation KitsG2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
- Master ring and pinion installation kit for the rear Dana 44 on Jeep JK Rubicon, part number 35-2052
- Includes Timken pinion bearings and carrier bearings with races
- Made for JK Rubicon rears with a factory locker
- Covers Wrangler JK, 2007–2018
SKU: G/235-2052 -
Ring and Pinion Installation Kits
G2 Toyota 7.5 Inch Tacoma Front Master Ring and Pinion Installation Kit – 35-2055
Ring and Pinion Installation KitsG2 Toyota 7.5 Inch Tacoma Front Master Ring and Pinion Installation Kit – 35-2055
- Master kit with bearings for the Toyota 7.5-inch IFS (Tacoma) axle, front
- For use in Toyota 7.5-inch IFS non clam shell front axle
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2055 -
Ring and Pinion Installation Kits
G2 GM 12 Bolt Truck Master Ring and Pinion Installation Kit – 35-2018
Ring and Pinion Installation KitsG2 GM 12 Bolt Truck Master Ring and Pinion Installation Kit – 35-2018
- Master kit with bearings for the GM 12 bolt truck, 8.875-inch axle, rear
- Pinion and carrier bearings with shims, nut, seal and crush sleeve
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2018
What belongs in this category
These are the parts that live inside and around the axle housing. Ring and pinion gear sets and installation kits set the final drive ratio. Differentials, including limited-slip and locking units, control how torque is split between the wheels. Axle upgrade kits, axle housing parts, differential covers, ball joints and locking hub spindle nuts round out the group.
The sample listings mention axles such as the Dana 44, Dana 70, Chrysler 8.25 inch and Ford 9.75 inch, so identifying your axle model is the first step.
Choosing a ratio and a differential
Gear ratio should follow tire size and how the vehicle is used. Larger tires effectively raise the overall gearing, which makes the engine work harder and can hurt acceleration and towing. Regearing to a numerically higher ratio restores some of that lost performance. Front and rear ratios must match on a four-wheel-drive vehicle.
- An open differential is the stock choice and offers smooth street manners.
- A limited-slip unit shifts torque toward the wheel with traction while keeping some road manners.
- A locker forces both wheels to turn together for maximum traction on the trail, with some trade-offs in tire wear and handling on pavement.
What to verify before ordering
- Axle model, spline count, bolt pattern and carrier style, because parts differ even within one axle family.
- Tooth count and ratio of the existing gears, which determine whether you need a new matched set.
- Whether a kit includes bearings, shims, seals and hardware or only the gears.
- Front or rear position and side, as parts are often not interchangeable.
Installation notes
Setting up ring and pinion gears requires measuring pinion depth, backlash and bearing preload with the right tools. Mistakes cause noise and premature failure, so many owners leave this job to an experienced drivetrain shop. Ball joints, seals and axle shafts are more approachable but still need proper torque values and clean, correctly lubricated assemblies.
Replace gear oil after installation, follow the break-in procedure from the gear maker, and confirm fitment for your exact year, make and model against the manufacturer's specifications.
Further checks and care
Common mistakes to avoid
Mixing gear sets is a frequent error, since a ring gear and pinion are lapped and matched as a pair. Reusing old bearing races, skipping new shims or ignoring carrier spread can undo an otherwise good build. Another mistake is regearing only one axle. Before you start, gather the correct crush sleeve or shims, thread locker, gear marking compound and the specified gear oil, and keep the work area clean, since grit inside a differential shortens its life.
Measuring and confirming your axle
Beyond the ID tag, confirm the number of ring gear bolts, the carrier bearing style, the axle spline count and the housing width before ordering anything. Record the existing ratio from the tooth counts on the ring gear and pinion, or by counting driveshaft turns for one full wheel rotation. Photos of the cover shape and the axle tube diameter help when comparing against the listing. If a product mentions a specific vehicle platform, confirm it matches yours before proceeding.
Materials, construction and maintenance
Gear sets are usually made from forged alloy steel that is heat treated, and quality depends on tooth pattern accuracy and finishing. Ball joints and bearings rely on correct grease and sealing. After the first few hundred miles of use, change the gear oil to remove break-in metal, then follow the maker's interval. Check axle seals and vent hoses periodically, since a plugged vent can push fluid past seals and contaminate brakes.
Popular Performance Axle Components brands
- G2 Axle and Gear (297)
- Dana Spicer (64)
- Moog (59)
- Crown Automotive (34)
- ARB 4x4 Accessories (33)
- Trail Gear (27)
- Alloy USA (22)
- Eaton (16)
- Motive Gear (15)
- Mag-Hytec (12)
- Omix-Ada (10)
- Dynatrac (9)
Shop Performance Axle Components by type
- Ring and Pinion Installation Kits (216)
- Differential Covers (99)
- Axle Ball Joints (94)
- Axle Upgrade Kits (49)
- Differentials (40)
- Axle Housing (24)
- Hub Gears And Drive Flanges (16)
- Axle King Pin Parts (14)
- Differential Air System Line Fitting (10)
- Differential Air System Line (3)
- Differential Housing (3)
- Carrier Cross Shafts (3)
- Locking Hub Service Kits (1)
- Locking Hub O-Ring (1)
Performance Axle Components FAQ
How do I know which axle I have?
Look for a tag or ID number on the housing, check the cover shape and bolt count, and consult the vehicle's build information. Measuring the ring gear diameter can confirm it. Verify before ordering gears, because many axles look alike.
Do I have to change both front and rear gears together?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match so the axles turn at the same relative speed, or the driveline can bind and wear out quickly.
Can I install a ring and pinion myself?
It is possible with a dial indicator, torque wrench and the right bearing tools, but correct setup takes experience. Incorrect pinion depth or backlash causes noise and failures, so a professional drivetrain installation is often the safer route.

