Performance Axle Components
Showing 565–576 of 669 resultsSorted by popularity
-
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ2-456M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.56 Ring and Pinion Minor Installation Kit – 4-XJ2-456M
- Fits the 1990–1996 Jeep Cherokee XJ (90-96 XJ Cherokee).
- 4.56 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ2-456M -
Ring and Pinion Installation Kits
G2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ2-488M
Ring and Pinion Installation KitsG2 Dana 30/35 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ2-488M
- Fits the 1990–1996 Jeep Cherokee XJ
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 reverse front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-XJ2-488M -
Ring and Pinion Installation Kits
G2 Dana 30/35 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ-488M
Ring and Pinion Installation KitsG2 Dana 30/35 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ-488M
- Fits the 1987–1995 Jeep Wrangler YJ
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 35 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-YJ-488M -
Ring and Pinion Installation Kits
G2 Dana 30 JK Master Ring and Pinion Installation Kit – 35-2050
- Master kit with bearings for the Dana 30 (Jeep JK front) axle, front
- For use in Jeep JK Dana 30 front only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2050 -
Differential Covers
G2 Ford 10.25 Inch/10.5 Inch Ball Milled Aluminum Cover – 40-2046MB
- Rear Ford 10.25 and 10.5 inch Sterling axles
- Cast lightweight aluminum with ball milled ribs
- Heat treated and shot peened body with a machined seal surface
- Extra oil capacity with filler, fill level and drain plugs
SKU: G/240-2046MB -
-
Ring and Pinion Installation Kits
G2 Toyota Tacoma 8.4 InchRear Minor Ring and Pinion Installation Kit – 25-2056
Ring and Pinion Installation KitsG2 Toyota Tacoma 8.4 InchRear Minor Ring and Pinion Installation Kit – 25-2056
- Minor installation kit for the Toyota Tacoma 8.4-inch axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2056 -
Ring and Pinion Installation Kits
G2 Dana 44 Minor Ring and Pinion Installation Kit – 25-2033
- Minor ring and pinion installation kit for Dana 44 axles, part number 25-2033
- Includes pinion nut, pinion seal, crush sleeve, shims and ring gear bolts
- For use when the existing bearings stay in place
- Built for Dana 44 front and rear axles; check ring gear size before ordering
SKU: G/225-2033 -
Ring and Pinion Installation Kits
G2 Dana 44 JK 08 Up Rear Minor Ring and Pinion Installation Kit – 25-2053
Ring and Pinion Installation KitsG2 Dana 44 JK 08 Up Rear Minor Ring and Pinion Installation Kit – 25-2053
- Minor ring and pinion installation kit for a 2008-and-newer JK rear Dana 44, part number 25-2053
- Includes pinion nut, pinion seal, crush sleeve, shims and ring gear bolts
- Keeps the existing bearings: no bearing change needed
- Compound and sealer included: thread locking, gear marking and silicone
SKU: G/225-2053 -
Ring and Pinion Installation Kits
G2 Ford 9.75 Inch Minor Ring and Pinion Installation Kit – 25-2012
Ring and Pinion Installation KitsG2 Ford 9.75 Inch Minor Ring and Pinion Installation Kit – 25-2012
- Minor installation kit for the Ford 9.75-inch axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2012 -
Ring and Pinion Installation Kits
G2 Dana 35 Minor Ring and Pinion Installation Kit – 25-2049
- Minor installation kit for the Dana 35 axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2049 -
Differential Housing
G2 Ford 9 Inch 3.250 Inch Bore Nodular Iron 3rd Member Case – 66-2011CN
- Heavy duty nodular iron 3rd member case for Ford 9 inch axles
- 3.250 inch carrier bearing bore for aftermarket differentials
- Support ribbing and improved pilot bearing support
- Billet steel spanner nuts, part number 66-2011CN
SKU: G/266-2011CN
What belongs in this category
These are the parts that live inside and around the axle housing. Ring and pinion gear sets and installation kits set the final drive ratio. Differentials, including limited-slip and locking units, control how torque is split between the wheels. Axle upgrade kits, axle housing parts, differential covers, ball joints and locking hub spindle nuts round out the group.
The sample listings mention axles such as the Dana 44, Dana 70, Chrysler 8.25 inch and Ford 9.75 inch, so identifying your axle model is the first step.
Choosing a ratio and a differential
Gear ratio should follow tire size and how the vehicle is used. Larger tires effectively raise the overall gearing, which makes the engine work harder and can hurt acceleration and towing. Regearing to a numerically higher ratio restores some of that lost performance. Front and rear ratios must match on a four-wheel-drive vehicle.
- An open differential is the stock choice and offers smooth street manners.
- A limited-slip unit shifts torque toward the wheel with traction while keeping some road manners.
- A locker forces both wheels to turn together for maximum traction on the trail, with some trade-offs in tire wear and handling on pavement.
What to verify before ordering
- Axle model, spline count, bolt pattern and carrier style, because parts differ even within one axle family.
- Tooth count and ratio of the existing gears, which determine whether you need a new matched set.
- Whether a kit includes bearings, shims, seals and hardware or only the gears.
- Front or rear position and side, as parts are often not interchangeable.
Installation notes
Setting up ring and pinion gears requires measuring pinion depth, backlash and bearing preload with the right tools. Mistakes cause noise and premature failure, so many owners leave this job to an experienced drivetrain shop. Ball joints, seals and axle shafts are more approachable but still need proper torque values and clean, correctly lubricated assemblies.
Replace gear oil after installation, follow the break-in procedure from the gear maker, and confirm fitment for your exact year, make and model against the manufacturer's specifications.
Further checks and care
Common mistakes to avoid
Mixing gear sets is a frequent error, since a ring gear and pinion are lapped and matched as a pair. Reusing old bearing races, skipping new shims or ignoring carrier spread can undo an otherwise good build. Another mistake is regearing only one axle. Before you start, gather the correct crush sleeve or shims, thread locker, gear marking compound and the specified gear oil, and keep the work area clean, since grit inside a differential shortens its life.
Measuring and confirming your axle
Beyond the ID tag, confirm the number of ring gear bolts, the carrier bearing style, the axle spline count and the housing width before ordering anything. Record the existing ratio from the tooth counts on the ring gear and pinion, or by counting driveshaft turns for one full wheel rotation. Photos of the cover shape and the axle tube diameter help when comparing against the listing. If a product mentions a specific vehicle platform, confirm it matches yours before proceeding.
Materials, construction and maintenance
Gear sets are usually made from forged alloy steel that is heat treated, and quality depends on tooth pattern accuracy and finishing. Ball joints and bearings rely on correct grease and sealing. After the first few hundred miles of use, change the gear oil to remove break-in metal, then follow the maker's interval. Check axle seals and vent hoses periodically, since a plugged vent can push fluid past seals and contaminate brakes.
Popular Performance Axle Components brands
- G2 Axle and Gear (297)
- Dana Spicer (64)
- Moog (59)
- Crown Automotive (34)
- ARB 4x4 Accessories (33)
- Trail Gear (27)
- Alloy USA (22)
- Eaton (16)
- Motive Gear (15)
- Mag-Hytec (12)
- Omix-Ada (10)
- Dynatrac (9)
Shop Performance Axle Components by type
- Ring and Pinion Installation Kits (216)
- Differential Covers (99)
- Axle Ball Joints (94)
- Axle Upgrade Kits (49)
- Differentials (40)
- Axle Housing (24)
- Hub Gears And Drive Flanges (16)
- Axle King Pin Parts (14)
- Differential Air System Line Fitting (10)
- Differential Air System Line (3)
- Differential Housing (3)
- Carrier Cross Shafts (3)
- Locking Hub Service Kits (1)
- Locking Hub O-Ring (1)
Performance Axle Components FAQ
How do I know which axle I have?
Look for a tag or ID number on the housing, check the cover shape and bolt count, and consult the vehicle's build information. Measuring the ring gear diameter can confirm it. Verify before ordering gears, because many axles look alike.
Do I have to change both front and rear gears together?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match so the axles turn at the same relative speed, or the driveline can bind and wear out quickly.
Can I install a ring and pinion myself?
It is possible with a dial indicator, torque wrench and the right bearing tools, but correct setup takes experience. Incorrect pinion depth or backlash causes noise and failures, so a professional drivetrain installation is often the safer route.





