Overview
The Firestone Ride-Rite Coil-Rite Air Helper Spring Kit, part number 4179, is a rear in-coil air helper spring kit for coil-sprung vehicles. Each unit fits inside the existing coil spring to add a variable spring rate, which keeps the vehicle level and helps braking and handling when loads are heavy.
This kit fits the 2005-2010 Acura MDX and 2005-2010 Honda Pilot, in the trims shown below. Installation requires no drilling, and inflation is done by hand with a compressor sold separately.
Key features
- Variable spring rate from a bag that sits inside the existing coil spring
- Rated for 500 lbs. per pair
- Helps keep the vehicle level and supports braking and handling under heavy loading
- Works in temperatures from -40F (-40C) to 180F (82C)
- Manual inflation with no drilling needed
Using an air helper spring
An in-coil air helper is a bag that fits inside the coil spring and adds support when the rear of an SUV or crossover is carrying extra weight. Passengers, cargo and a loaded roof box all push the rear down, and the bag helps hold the body closer to level. It works alongside the coil, so the stock spring still does most of the work at rest.
Setting pressure is the part most owners get wrong. Because the bag is inflated by hand, a compressor and gauge are needed, and the pressure should be adjusted for the load on that trip. Pumping too much air can make the ride harsh and stress the bag, while too little gives little benefit. Check the pressure after a few days of use, since temperature changes can shift it.
Inspect the bag and fittings every few months and after any heavy trip. Look for cracks, rubbing where the bag touches the coil, and air loss. Tighten loose fittings and replace any bag that will not hold pressure.
- Set pressure to the load you are carrying
- Check the bag where it rubs against the coil
- Tighten fittings after the first few trips
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 4179 |
| UPC | 767555129005 |
| System type | In-coil air helper (air bag) |
| Load capacity | 500 lbs. per pair |
| Bag type | Coil type bag |
| Position | Rear |
| Installation | No drilling required |
| Inflation method | Manual |
| Operating temperature | -40F (-40C) to 180F (82C) |
| Height sensor | Not compatible |
| Lift kit compatible | No |
Vehicle fitment
This kit fits these vehicles:
- 2005-2010 Acura MDX (Base, Touring)
- 2005-2010 Honda Pilot (EX, EX-L, LX, Special Edition, Touring, Value Package)
Model years and models outside this list, including other Acura and Honda models, are not covered by the fitment listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The springs install inside the existing coil springs without drilling. Because inflation is manual, an air compressor and gauges, sold separately, are needed to inflate the springs.
What’s included
Check the package contents against your installation before starting.
Not included: Air compressor and gauges, which are sold separately.









