Overview
The Firestone Ride-Rite Coil-Rite Air Helper Spring Kit, part number 4176, is an in-coil air helper spring kit for rear coil spring suspensions. Coil-Rite springs fit inside the existing coil springs to create a variable spring rate, which helps level the vehicle and supports braking and handling under heavy loads and rough road conditions.
It fits the 2016-2018 Hyundai Tucson, 2016-2019 Kia Sportage and 2018 Volkswagen Tiguan models. The trims for each vehicle appear below.
Key features
- Fits inside existing coil springs with no drilling required
- Variable spring rate that helps level the vehicle under heavy loading
- Rated for 500 lbs. per pair
- Designed to work in temperatures between -40F (-40C) and 180F (82C)
- Manual inflation; an optional compressor and gauges are sold separately
Tire and Load Considerations
Compact crossovers carry a lot of their weight over the rear axle when loaded with passengers and gear, and an air helper can help keep the rear level under that load. Tire condition matters here: worn or underinflated tires reduce the benefit of any helper, so check tread and pressure whenever the bags are set. Keep the spare and tire pressures in mind when choosing the bag pressure.
When adding helpers, think about the full rear setup. Shock absorbers, bushings and bump stops carry the same loads, and a soft or leaking part can make the bags feel inconsistent. Inspect these parts at installation, and re-check the bag pressure after a long trip or a change in cargo.
- Check tire tread and pressure before setting the bags
- Inspect shocks and bushings alongside the helpers
- Re-check bag pressure after changing the cargo load
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 4176 |
| UPC | 767555117477 |
| System type | In-coil air helper (air bag) |
| Load capacity | 500 lbs. per pair |
| Bag type | Coil type bag |
| Position | Rear |
| Installation | No drilling required |
| Inflation method | Manual |
| Operating temperature | -40F (-40C) to 180F (82C) |
| Height sensor | Not compatible |
| Lift kit compatible | No |
Vehicle fitment
It fits these vehicles:
- 2016-2018 Hyundai Tucson (Eco, Fuel Cell, Limited, SE, SEL, SEL Plus, Sport, Value, Value Edition)
- 2016-2019 Kia Sportage (EX, LX, SX, SX Turbo)
- 2018 Volkswagen Tiguan (S, SE, SEL, SEL Premium)
- 2018 Volkswagen Tiguan Limited (Base)
Model years and models outside this list are not covered by the fitment listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The springs install inside the existing coil springs without drilling. Because inflation is manual, plan on adding an air compressor and gauges, which are sold separately.
What’s included
Check the package contents against your installation before starting.
Not included: Compressor and gauges, which are sold separately.









