Overview
The Timbren SES Suspension Enhancement System, rear, part number T/IGMRCK25D, is a rubber spring upgrade for the rear suspension of 2011-2021 GMC Sierra and Chevy Silverado 2500HD and 3500HD pickup trucks. It replaces the bumpstops on the rear suspension, and it also replaces the jounce stop on the frame.
The hollow rubber springs use a progressive rate, so the more weight that presses down on them, the harder they work to hold the rear up. That helps when towing a trailer or carrying a heavy load in the bed. The kit is rated at 8600 lbs capacity, and Timbren positions it as giving ride quality that works both loaded and unloaded, when the gap is set right. A higher spring rate here leaves the GVWR where the manufacturer set it, so the load limit still applies. Owners comparing this with the 1500 kits should note that the model names differ, since this kit is written for the 2500HD and 3500HD trucks.
Key features
- Hollow rubber springs that stiffen as the load rises
- Replaces the bumpstops on the rear suspension and the jounce stop on the frame
- Rated at 8600 lbs capacity
- Gap of 1/2″ to 1-1/2″ between rubber spring and axle for unloaded ride quality
- Load limit still follows the GVWR
Rear suspension wear signs
Rubber spring add-ons like this one work with the factory leaf springs and bumpstops rather than replacing them. When the rear sags under a trailer tongue or a heavy bed load, the rubber springs take up part of that weight, which reduces how far the axle drops toward the frame. Unloaded, the gap to the axle keeps the ride closer to stock, so the setup suits trucks that spend most of their time empty.
Worn factory bumpstops and jounce stops are often replaced at the same time, since old rubber can crack or flatten with age. Look for splits, missing chunks or compressed rubber before fitting. Leaf springs with broken leaves or a sagging rear end usually need attention before any rubber spring upgrade goes in. Shocks that have lost damping are also worth checking, because a stiffer rear can expose worn shocks.
Specifications
| Brand | Timbren |
|---|---|
| Part number | T/IGMRCK25D |
| Application | Rear |
| System type | Rubber spring |
| Fitment category | Universal Fit |
| Rated capacity | 8600 lbs |
| Spring gap | 1/2″ to 1-1/2″ between rubber spring and axle |
Vehicle fitment
This kit is marked Universal Fit, but it is written for the 2011-2021 GMC Sierra and Chevy Silverado 2500HD and 3500HD pickup trucks.
Light-duty 1500 trucks are not among the named models, so do not assume fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bumpstops come off before the new springs go on, since this kit replaces them. After fitting, measure the gap between each rubber spring and the axle; it should fall between 1/2″ and 1-1/2″. Keep trailer and bed loads within the GVWR. Support the rear axle with stands while working under the truck.
What’s included
The rubber springs and bumpstop replacement are the components named, and no hardware list is supplied.












