Overview
The Timbren Rear Axle SES Suspension Upgrade, part DR1500DS, is a rear suspension upgrade of hollow rubber springs for the Ram 1500 Regular Cab pickup truck. It replaces the jounce stop on the frame, and the rubber spring works against the rear axle.
The hollow rubber springs have a progressive spring rate. As weight presses down on them, they push back harder to limit rear end sag. The springs adjust automatically to keep the vehicle level when towing a trailer or carrying a heavy load in the bed.
The design aims for steady ride quality both loaded and unloaded, provided the gap between the rubber spring and axle is set correctly. It works as an alternative to other auxiliary spring setups.
Key features
- Hollow rubber springs with a progressive spring rate
- Adjusts automatically to keep the vehicle level when towing or carrying a load.
- Replaces the jounce stop on the frame
- Calls for a 1/2 in to 1-1/2 in gap between rubber spring and axle for unloaded ride quality
- Rear application with a rubber spring system
- Designed for steady ride quality both loaded and unloaded.
Choosing a rear spring upgrade
A rear auxiliary spring works with the suspension already on the truck, not in place of it. It helps most when the rear carries extra weight from a trailer hitch or a loaded bed, and it has less effect on an empty truck. Rubber springs of this type compress more as load increases, so the gap to the axle matters. Too little clearance can cause the spring to contact the axle early, and too much can leave the rear sagging before the spring engages.
Before buying, think about how the truck is normally used. Frequent heavy towing may call for a different setup than occasional bed loads. Shocks, bump stops and tires all affect how the rear settles, so a worn shock can make a good spring setup feel unsettled. Check the rubber for cracks, bulges or oil contamination at each service interval, and make sure the mounting hardware stays tight.
Specifications
| Brand | Timbren |
|---|---|
| Part number | DR1500DS |
| Position | Rear |
| System type | Rubber spring |
| Spring rate | Progressive |
| Unloaded gap | 1/2 in to 1-1/2 in between rubber spring and axle |
| Replaces | Jounce stop on the frame |
Vehicle fitment
It is designed for the Ram 1500 Regular Cab pickup truck. Check fit against your vehicle’s year, model and trim before ordering.
Check fit against your vehicle’s year, model and trim before ordering, since other cab configurations are not part of this application.
Installation notes
Measure the gap between the rubber spring and the axle with the truck empty, aiming for 1/2 in to 1-1/2 in for unloaded ride quality. Replacing the jounce stop changes how the rear suspension compresses, so recheck ride height after installation. Keep the truck safely supported on stands while working underneath.
What’s included
The kit is one rear SES suspension upgrade. Check the package contents against your installation before starting.










