Overview
The Timbren Front Axle SES Suspension Upgrade, part FF550SDH, is a front suspension upgrade built around hollow rubber springs. It is intended for the front suspension of Ford F-350, F-450 and F-550 cab and chassis trucks, and it fits the 2005–2019 Ford F-350 Super Duty.
Each steel piece is laser cut, precision welded and powder-coated for a precise fit. The hollow rubber springs use a progressive spring rate, so they resist more as load grows, which helps limit front-end sag. Snowplows and heavy accessories such as a steel bumper are typical loads for this design.
Applications such as a slide-in camper, salt spreader, corner mounted crane or other aerial device are the uses this Severe Service kit is meant for. Any use needing maximum stability, with reduced roll and sway, also calls for this kit.
Key features
- Front application with a rubber spring system
- Hollow rubber springs with a progressive spring rate
- Each steel piece is laser cut, precision welded and powder-coated
- Helps limit front-end sag from snowplows and heavy front accessories
- Recommended for Severe Service uses such as slide-in campers and salt spreaders
- Reduces roll and sway in applications that need maximum stability
Front suspension loads and plows
A plow or steel bumper concentrates weight on the front axle, which compresses the front springs and can drop the nose of the truck over time. Upgrades built around rubber springs with a rising rate are meant to push back harder as that load increases. Front tires, wheel bearings and steering components also carry more of the work when a heavy accessory is fitted, so they deserve a look.
After installation, measure front ride height and compare it with the rear. Check the shock absorbers and any worn bushings, since loose parts shift the load away from the springs. Keep tire pressure at the placard value, and recheck fasteners after the first few drives with the accessory mounted.
- Front ride height before and after fitting
- Plow or bumper weight and mounting
- Shock and bushing condition
Specifications
| Brand | Timbren |
|---|---|
| Part number | FF550SDH |
| Position | Front |
| System type | Rubber spring |
| Spring rate | Progressive |
| Construction | Laser cut steel, precision welded and powder-coated |
Vehicle fitment
It fits 2005–2019 Ford F-350 Super Duty, including Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL and XLT trims. Confirm fit for F-450 and F-550 cab and chassis trucks before ordering.
This is a front-axle part, so it does not cover rear suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the springs respond to load on the front end, check front-end height after a plow or steel bumper is fitted, since Timbren links those loads to front-end sag. Work on front suspension components should be done by someone experienced with truck suspension.
What’s included
The kit is one front SES suspension upgrade. Check the package contents against your installation before starting.










