Overview
The Timbren Ford Spacer Kit, part SPCRFF350SDC, is a spacer set that lets a Timbren SES kit work on a lifted Ford F-250 or F-350 pickup. It is designed for trucks where a lift has increased the distance between the frame and the front axle, which reduces how well a standard SES helper spring performs.
Popular Timbren SES kits were built for pickups at standard ride height. Once a lift increases the gap between the frame and front axle, the SES assembly alone can leave the truck squatting under load. The spacer kit fills that gap on a Ford F-250 or F-350 with roughly 6.25 in to 7.75 in between the frame and front axle.
The spacers work with the SES assembly and can be combined to reach the desired ride height. The same kit also suits trucks with a leveling kit, a body lift or a full suspension lift, so the SES kit keeps working while hauling or plowing.
Key features
- Adapts Timbren SES kit FF350SDC to lifted Ford F-250 and F-350 trucks
- Requires the Timbren SES kit FF350SDC; the spacer kit does not work alone
- Fully adjustable to achieve correct ride height
- Adjusts SES ride height for up to 7.75 in
- Mix-and-match 1 in and 1/2 in rubber spacers
- Suits leveling kits, body lifts and full suspension lifts.
- Includes all necessary hardware
Setting ride height with spacers
Ride height on a lifted Super Duty can drop under load once the lift changes the geometry of the front suspension. The spacers fill the space between the frame and the front axle so the SES assembly can work at a height closer to its design. Mixing the 1 in and 1/2 in pieces lets you dial in the stance without changing the whole setup.
Before adding spacers, check the front shocks, control arm bushings and the steering components for wear, since a lift often exposes parts that were fine at stock height. Recheck the height after any change in tire size, bumper or plow mount. Keep the hardware tight and inspect the spacers for compression or cracks during routine service.
- Measure frame to axle gap with the truck empty
- Recheck height after adding a plow or bumper
- Inspect spacers for compression or cracking
Specifications
| Brand | Timbren |
|---|---|
| Part number | SPCRFF350SDC |
| Required SES kit | Timbren SES kit FF350SDC |
| Ride height adjustment | Up to 7.75 in |
| Spacers | One pair of 1 in rubber spacers and one pair of 1/2 in rubber spacers |
| Frame to front axle gap | Approximately 6.25 in to 7.75 in when the truck is empty |
| Hardware | All necessary hardware included |
Vehicle fitment
The manufacturer fitment list covers the 2005–2022 Ford F-250 Super Duty and 2005–2022 Ford F-350 Super Duty, with trims including Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL and XLT.
Other Ford models, including the F-450 and F-550, are not covered by this kit. Check year, model and trim against your truck before ordering.
Installation notes
Measure the gap between the frame and front axle with the truck empty. If it falls in the roughly 6.25 in to 7.75 in range Timbren gives, the spacers are the intended fit. Mix the 1 in and 1/2 in spacers to reach the ride height you want, then recheck the height before hauling or plowing.
What’s included
A pair of 1 in rubber spacers, a pair of 1/2 in rubber spacers and all necessary hardware.
Not included: The Timbren SES kit FF350SDC, which the spacer kit requires.














