Overview
The ARB UCA0005 is an Old Man Emu upper control arm for Toyota Tacoma trucks with independent front suspension. It fits 2005–2021 Tacomas in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner trims. This arm brings the alignment cams back into an acceptable range for caster and camber after a suspension lift.
A suspension lift can move caster and camber outside factory specification. The Old Man Emu upper control arm brings the alignment cams back into an acceptable range for both caster and camber.
Key features
- Upper control arm for lifted Tacomas
- Brings caster and camber back into range.
- Up to 1.5 degrees negative camber increase.
- Between +2.5 and +3.5 degrees caster.
- Direct fit for the listed trims
Reading caster and camber
Caster is the forward or backward tilt of the upper pivot, and camber is the inward or outward tilt of the wheel. Both change as the suspension moves, and a lift tends to push them past the range the factory set. Upper arms with adjustment give the alignment shop room to bring them back.
Tacoma owners often run larger tires for trail use, which makes clearance and steering load more important. Check the tire and wheel combination before installation, and plan a full alignment so the new arms are set to the actual truck rather than to a generic value.
- Inspect the arm ends and bushings for play
- Watch for rubbing at full steering lock
- Check tire wear patterns after the first few drives
- Keep alignment records for future service
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | UCA0005 |
| Position | Front upper control arm |
| Caster increase | +2.5 to +3.5 degrees. |
| Camber increase | Up to 1.5 degrees negative. |
| Lift basis | Approximately 50 mm or 2 inch lift |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2021 Toyota Tacoma in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner trims.
The list does not include the 2022 and later Tacoma or the 4Runner. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Once the arms are installed, redo the wheel alignment. Check fender clearance on any tire and wheel that differs from factory, and plan for extra caster if they do not clear.
What’s included
One upper control arm is included. Look over the box contents against your installation before starting, including any hardware you need.






