Overview
The Bilstein B8 Upper Control Arm, part number 51-304683, is a front upper tube arm for the Toyota Tacoma. It is a direct fit for 2005 to 2023 Tacoma models in the trims named in the fitment. The arm is designed to correct suspension geometry and increase suspension travel on lifted trucks and SUVs.
The arm has increased caster and improved ball joint pivot angles. Those changes add straight line stability and extra wheel travel when the trail gets rough. The B8 is built to that design.
The B8 arms are matched to 5100 RHA, 6100 RHA, 6112 and 8112 suspension packages. Confirm compatibility with any other kit before ordering.
Caster is the forward tilt of the steering axis. Raising a truck usually reduces caster, which is why an upper arm with more built-in caster is used on lifted trucks.
Key features
- Front upper tube-style control arm
- Increased caster angle
- Improved ball joint pivot angle
- Extra wheel travel and straight line stability
- Matched to Bilstein 5100 RHA, 6100 RHA, 6112 and 8112 packages
- Direct fit for 2005 to 2023 Tacoma
Upper arm geometry on lifted trucks
Upper control arms set the top pivot of the wheel assembly, so their angles strongly affect camber and caster. A lift usually pulls caster down, which is why upper arms with more built-in caster are common on raised trucks. The ball joint in the arm also sets how the steering pivots, and a joint with a better pivot angle can reduce binding at full steering lock.
Worn upper parts show up as clunking over bumps, a loose steering feel, and uneven tire wear. Check the ball joints and bushings during service, and replace worn parts on the same side together so the geometry stays matched.
- Inspect ball joints for play before fitting any new upper arm
- Check the lower arms and tie rod ends for wear at the same time
- Re-check alignment after any upper arm change
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 51-304683 |
| Position | Front upper |
| Type | Tube |
| Caster | Increased |
| Fit | Direct fit |
Vehicle fitment
The arm fits 2005 to 2023 Toyota Tacoma models, including Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner trims.
Toyota 4Runner and Tundra models are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have the alignment checked after installation, because the arm changes caster.
What’s included
The front upper control arm. Check the package for bushings and hardware before installation.










