Overview
The Fabtech Uniball Upper Control Arm System, part number FTS22336, replaces the factory Bronco upper control arms with Uniball upper arms. It is a direct fit for 2021 and 2022 Ford Bronco models in the trims named below, sold as a 3 in. system.
The arms add travel and an extra degree of caster compared with stock arms. The added caster helps balance steering effort when running oversized tires.
The arms are made from 4130 chromoly steel tubing with a 1.25 in. outside diameter. The 1 in. FK stainless PTFE-lined uniball bearings replace the small factory ball joints and allow travel without bind.
The arms are designed for long life in rugged off-road use and give a more positive on-road feel.
Key features
- 4130 chromoly tubing, 1.25 in. outside diameter
- 1 in. FK stainless PTFE-lined Uniball bearings
- Extra caster compared with stock arms.
- Designed for additional wheel travel without bind
- Direct fit for 2021 to 2026 Ford Bronco
- Part number FTS22336
Tires and caster balance
Larger tires put more load on steering and can make a truck feel heavier to turn at low speed. Added caster brings the steering axis further forward, which tends to firm up steering and improve straight-line stability at speed. That effect is easiest to judge on a test drive after the alignment is set.
Tire size, wheel offset and steering gear all influence how the change feels, so the arms are best judged as one part of the front end. Tie rods, track bar mounts and sway bar links should be checked at the same time, since worn steering parts can mask the benefit of new arms.
- Check tire size against the rated load before adding more diameter
- Inspect steering components before the alignment appointment
- Recheck toe after the first few highway drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22336 |
| Position | Upper control arm, replaces factory Bronco arms |
| Tube | 4130 chromoly, 1.25 in. outside diameter |
| Uniball | 1 in. FK stainless, PTFE-lined |
| Fit | Direct fit |
Vehicle fitment
It fits 2021 to 2026 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Other Bronco years and the Bronco Sport are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing the arms replaces the factory upper control arms. Plan on an alignment check afterward, because the added caster changes front alignment.
What’s included
The Uniball upper control arm system.














