Overview
The ARB UCAJKRR is an adjustable rear upper control arm for the 2007–2018 Jeep Wrangler (JK), two-door and Unlimited four-door. The arm is a tube type part, and ARB says adjustable arms let owners set caster and pinion angles to fine tune ride and handling.
The upper control arms use a 1.25-inch by 0.188-inch wall (31.7 mm by 4.7 mm) DOM steel tube with a forged rod end or eyelet. Each arm is shot peened, zinc electroplated and powder coated for corrosion resistance.
Key features
- Adjustable caster and pinion angles
- Rear upper position
- 1.25-inch by 0.188-inch wall DOM steel tube
- Forged rod end or eyelet
- Shot peened, zinc electroplated and powder coated
- Direct fit for the listed JK trims
Caster, pinion and alignment
Upper control arms locate the axle and keep it from rotating under braking and acceleration. Adjustable arms add a way to set caster and pinion angles, which affects steering feel, ride and tracking at speed, so the setting should be chosen with the lift and tire size in mind.
Changing the arm length affects the other suspension parts. Lower arms, track bars and bushings all share the load, and a new arm may call for a check of the driveline angles. Replacing worn bushings and ball joints in the same job prevents a new arm from carrying load it was not built for.
Adjustment should be done with the vehicle on level ground and the wheels straight. Note the factory settings before making changes, make small adjustments, and recheck the alignment afterward. Look for wear on the rod ends and the tube at each service, since bent or cracked tubes need replacement.
- Record factory settings before adjusting
- Check rod ends for play
- Recheck alignment after every adjustment
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | UCAJKRR |
| Position | Rear upper |
| Type | Tube |
| Tube size | 1.25 inch by 0.188 inch wall (31.7 mm by 4.7 mm) |
| Material | DOM steel tube |
| Ends | Forged rod end or eyelet |
| Finish | Shot peened, zinc electroplated, powder coated |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) two-door in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and the Unlimited four-door in the same trims. Not covered: the 2019 and later Wrangler JL or the 2020–2022 Gladiator JT. Confirm your vehicle’s year, model and trim before ordering.
The list does not include the 2019 and later Wrangler JL or the 2020–2022 Gladiator JT. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the upper control arms changes caster and camber, so a wheel alignment is needed after installation.
What’s included
One rear upper control arm, made of tube and ends. Bushings and hardware are not included, so check the contents against your installation before starting.









