Overview
The Fabtech Aluminum Uniball Upper Control Arms with Bearing Rod Ends, part number K1142, are billet front upper control arms for 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. It is a direct fit for the trims covered here. The arms are machined from 6061 aluminum with thick cross sections.
The billet construction reduces suspension flex and gives a more positive road feel. The arms use large PTFE-lined 1 in. ID stainless steel uniball bearings and 17-4 stainless steel pins. The pin is tapered to fit the stock ball joint taper, which allows an easy return to stock.
Paired with Dirt Logic coilover shocks, the uniballs allow more wheel travel. The arms have a black anodized finish.
The frame side uses either FK 3/4 in. heim ends, which eliminate control arm deflection and create a solid frame mount, or forged steel rod ends with urethane bushings, which run quieter with less vibration transfer and suit most highway driving. Confirm which end type is in your kit before ordering.
Key features
- 6061 billet aluminum construction
- 1 in. ID PTFE-lined stainless uniball
- 17-4 stainless steel pins tapered to the stock ball joint taper
- Frame-side choice of FK 3/4 in. heim ends or forged rod ends with urethane
- Black anodized finish
- Works with Dirt Logic coilover shocks.
Before you install billet arms
Billet arms are solid and stiff, so they transmit more road feel than stock arms and less flex under load. That stiffness also means the joints carry more of the work, so the bearings and seals deserve regular attention. Inspect the uniballs and rod ends for play, dirt and seal damage at every oil change or tire rotation.
Because upper arms change the suspension geometry, check tire clearance and steering stop contact after installation. Recheck the alignment after the first few drives, since settling in the new joints can shift the setting slightly. Keep the frame-side end type you chose in mind when setting up the alignment.
- Grease or inspect joints at regular intervals
- Check tire clearance through full travel
- Recheck alignment after the first drives
- Confirm the frame-side end type before fitting
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1142 |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Joint | Uni-Ball, 1 in. ID stainless, PTFE-lined |
| Pin | 17-4 stainless steel |
| Frame-side ends | FK 3/4 in. heim or forged rod end with urethane; type not stated |
| Finish | Black anodized |
| Fit | Direct fit |
Vehicle fitment
Fabtech lists these arms for 2019 Chevrolet Silverado 1500 models, including Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV and WT trims, and 2019 GMC Sierra 1500 models, including AT4, Base, Denali, Elevation, SLE and SLT trims.
Silverado and Sierra years other than 2019 are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pin fits the stock ball joint taper without spindle modification. Confirm the frame-side end type before fitting, then have the alignment checked.
What’s included
The billet upper control arms with bearing rod ends. Confirm the frame-side end type that comes with your kit.











