Overview
The Crown Automotive Rear Lower Control Arm, part number 52125322AC, is a box-style rear left lower arm that includes bushings. It is a direct fit for 2007 to 2011 Dodge Nitro models and 2008 to 2012 Jeep Liberty (KK) models, in the trims named in the fitment.
Box-style arms are formed from steel sections rather than round tube. The lower arm locates the rear axle and controls its position as the suspension travels. The bushings are the parts that wear, so a new set restores the arm’s pivot points.
Nitro and Liberty use their own rear arms, so confirm the vehicle before ordering. Check arm dimensions, weight and material grade against your build if those details matter to you.
Key features
- Box-style construction
- Rear left lower position
- Includes bushings
- Direct fit for 2007 to 2011 Nitro and 2008 to 2012 Liberty KK models.
- Part number 52125322AC
Box-style rear arms
Box-style control arms are built from formed steel sections, which gives a different profile than round tube arms. On a Nitro or Liberty, the arm holds the axle’s fore and aft position, so bushing condition has a direct effect on rear tracking. A complete arm with its bushings is a practical way to restore that location.
Before ordering, confirm the rear left lower position and the body style of the vehicle, because the right side is a separate part. Replacing both sides together helps keep the rear geometry matched. Check the frame mounts and fasteners while the old arm is off, and use a service manual for torque specifications and the removal sequence.
After installation, have the rear alignment checked and take a short drive to listen for clunks, which can point to other worn rear parts.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52125322AC |
| Position | Rear left lower |
| Type | Box |
| Includes | Bushings |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2011 Dodge Nitro models, including Detonator, Heat, R/T, SE, SLT, SXT and Shock trims, and 2008 to 2012 Jeep Liberty (KK) models, including Jet, Limited, Renegade and Sport trims.
Wrangler and other Jeep models, and Nitro years outside 2007 to 2011, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the old arm and fit this one with its bushings. Use a service manual for the removal and installation sequence.
What’s included
The rear left lower control arm with bushings.









