Overview
The Crown Automotive Rear Upper Control Arm, part number 52125321AB, is a box-style rear left upper arm that includes bushings. It is a direct fit for 2007 to 2011 Dodge Nitro models and 2008 to 2012 Jeep Liberty (KK) models, in the trims named in the fitment.
Upper control arms hold the axle’s position relative to the body and resist its movement under load. Their bushings are the parts that wear and let the axle move, so the bushings supplied with this arm are part of what is being replaced.
The arm is box-style, which means formed steel sections rather than round tube. Confirm arm dimensions, weight and material grade before fitting if they matter for your build.
The arm fits Nitro and Liberty models only. Confirm the position is the rear left upper before ordering, since the right side is a separate part.
Key features
- Box-style construction
- Rear left upper position
- Includes bushings
- Direct fit for Nitro and Liberty KK models.
- Part number 52125321AB
Upper arm bushings and axle control
Rear upper control arms carry braking and acceleration forces through the axle and back to the body. Their bushings absorb movement, and wear shows up as clunks over bumps or a rear end that shifts under braking. Because the bushings are the wear points, replacing them with the arm restores the original pivot action.
Box-style arms have a different profile from round tube arms, so check clearance at the body and the axle before installing. Confirm the arm length and mounting points match what you removed. Replacing rear upper and lower arms on the same side at once keeps axle location consistent, and a shop with a service manual can confirm torque values.
After installation, have the rear alignment checked and drive slowly to listen for new noises.
- Check clearance at the body and axle
- Confirm the left side before ordering
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52125321AB |
| Position | Rear left upper |
| Type | Box |
| Includes | Bushings |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2011 Dodge Nitro models, including Detonator, Heat, R/T, SE, SLT, SXT and Shock trims, and 2008 to 2012 Jeep Liberty (KK) models, including Jet, Limited, Renegade and Sport trims.
Wrangler, Grand Cherokee and other models are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the old arm and fit this one with its bushings. Have the rear alignment checked after replacement.
What’s included
The rear left upper control arm with bushings.








